Preshaping input trajectories of industrial robots for vibration suppression

This paper presents several novel methods that improve the current input shaping techniques for vibration suppression for multi-degree of freedom industrial robots. Three different techniques, namely, the optimal S-curve trajectory, the robust zero-vibration shaper, and the dynamic zero-vibration shaper, are proposed. These methods can suppress multiple vibration modes of a flexible joint robot under a computed torque control based on a rigid model. The time delays for each method are quantified and compared. The optimal S-curve trajectory finds the maximum jerk to obtain the minimum vibration. The robust zero-vibration shaper can suppress multiple modes without an accurate model. The delay of the dynamic zero-vibration shaper is smaller than the existing input shaping techniques. Our analysis is verified both by simulation and experiment with a six degrees of-freedom commercial industrial robot.