FEATURES OF ELECTRO-SPARK ALLOYING ON TITANIUM BY GRAPHITE

被引：0
|
作者：
Mihailov, V. [1 ]
Gitlevich, A. [1 ]
Cazac, Gr. [1 ]
Baciu, C. [2 ]
机构：
[1] Moldavian Acad Sci, Inst Appl Phys, 5 Acad Str, MD-2028 Kishinev, Moldova
[2] Tech Univ Iasi, Iasi, Romania
来源：
BALTTRIB' 2009: V INTERNATIONAL CONFERENCE, PROCEEDINGS | 2009年
关键词：
electro-spark doping on titanium; graphite; hard metal T15K6; the synthesis of carbide phases; wear and corrosion resistant coating;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
It was studied the features of electric-spark doping (ESE)) on titanium and its alloys by graphite and hard metal T15K6 under different treatment conditions (it was varied energy discharge, the specific processing time, the interelectrode medium). In all ESD conditions in the formed layer there was noticed three phases - titanium carbide, titanium and graphite. The maximum quantity of titanium carbide was synthesized at an energy discharge of 0,3-0,45 J (1(p)similar to, 1,5...2,0 A on the installation "Elitron-22"). The most high-quality coatings on titanium were obtained by successive ESD firstly by graphite on the soft mode with an energy discharge of 0.1 J, and then by hard metal T15K6 on the energy mode of 0.5 J. The obtained coatings significantly increase the wear-and corrosion resistance (in sulphuric acid) of titanium and its alloys.
引用
收藏
页码：282 / +
页数：2
相关论文
共 50 条
  • [21] Research on the Interface Behavior Between Titanium Steel and WC Coating Produced by the Electro-Spark Deposition
    Yu, Hua
    Zhang, Ke-Ke
    Shi, Hong-Xin
    Wang, Yao-Li
    Zhu, Yao-Min
    JOURNAL OF COMPUTATIONAL AND THEORETICAL NANOSCIENCE, 2012, 9 (09) : 1404 - 1407
  • [22] Coatings Prepared by Electro-Spark Alloying with SHS Electrode Materials Based on Ti-B-Fe-AlN
    Bolotskaia, Anastasia
    Avdeeva, Varvara
    Bazhin, Pavel
    Mikheev, Maksim
    Stolin, Alexander
    Novikov, Vseslav
    Kovaleva, Marina
    Sirota, Viacheslav
    COATINGS, 2023, 13 (07)
  • [23] Electro-spark coatings for enhanced performance of twist drills
    Raju, K. R. C. Soma
    Faisal, Nadimul Haque
    Rao, D. Srinivasa
    Joshi, S. V.
    Sundararajan, G.
    SURFACE & COATINGS TECHNOLOGY, 2008, 202 (09): : 1636 - 1644
  • [24] MICROSTRUCTURE OF ELECTRO-SPARK COATINGS FOR SLIDING FRICTION PAIRS
    Antoszewski, Krzysztof
    Radek, Norbert
    Dudek, Agata
    METAL 2015: 24TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2015, : 1156 - 1161
  • [25] Research status and prospect of electro-spark deposition technology
    Zhang, Yong
    Li, Li
    Chang, Qing
    Wang, Xiao-Ming
    Zhao, Yang
    Zhu, Sheng
    Xu, An-Yang
    Gao, Xian-Wei
    Surface Technology, 2021, 50 (01): : 150 - 161
  • [26] Surface roughness modeling using machine learning approaches for wire electro-spark machining of titanium alloy
    Sharma, Vikas
    Misra, Joy Prakash
    Singhal, Sandeep
    INTERNATIONAL JOURNAL OF STRUCTURAL INTEGRITY, 2022, 13 (06) : 999 - 1012
  • [27] Progress in Research and Application of Electro-spark Deposition Technology
    Zhang J.
    Zhu C.
    Cailiao Daobao/Materials Reports, 2023, 37 (21):
  • [28] Study Features of Transients in the Circuits of Semiconductor Discharge Pulses Generators With Nonlinear Electro-Spark Load
    Shcherba, A. A.
    Suprunovska, N. I.
    2014 IEEE INTERNATIONAL CONFERENCE ON INTELLIGENT ENERGY AND POWER SYSTEMS (IEPS), 2014, : 50 - 54
  • [29] Discharge mechanism of electro-spark deposition with rotary electrode
    Han H.
    Guo J.
    Jiao W.
    Hanjie Xuebao/Transactions of the China Welding Institution, 2019, 40 (05): : 67 - 72
  • [30] Determination of Residual Stresses in Electro-Spark Deposited Coatings
    M. F. Berezhnitskaya
    A. V. Paustovskii
    S. N. Kirilenko
    Yu. V. Gubin
    Strength of Materials, 2003, 35 (6) : 633 - 637
12345