Effects of Defects and Inclusions on the Fatigue Properties of Inconel 718 Fabricated by Laser Powder Bed Fusion Followed by HIP

被引：5
|
作者：
Ogawahara, Manatsu [1 ,3 ]
Sasaki, Shinya [2 ]
机构：
[1] Tokyo Univ Sci, Grad Sch Engn, Dept Mech Engn, Tokyo 1258585, Japan
[2] Tokyo Univ Sci, Dept Mech Engn, Tokyo 1258585, Japan
[3] Tokyo Univ Sci, Tokyo, Japan
来源：
MATERIALS TRANSACTIONS | 2021年 / 62卷 / 05期
关键词：
laser powder bed fusion; Inconel; 718; fatigue; defect; inclusion;
D O I：
10.2320/matertrans.Y-M2021804
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Fatigue properties of parts fabricated by laser powder bed fusion, a kind of additive manufacturing, are inferior to those of conventional materials. Defects and inclusions are the causes of low fatigue properties, but their effect is not clarified. Inconel 718 specimens were fabricated by laser powder bed fusion. Cross-sectional observation and fatigue tests were performed. Gas porosity, cracks, and inclusions were observed in cross-section. TiN inclusions were observed in the fatigue fracture origins for specimens with hot isostatic pressing. To enhance the fatigue properties of Inconel 718 fabricated by laser powder bed fusion, it was suggested to remove entirely TiN inclusions within the powder.
引用
收藏
页码：631 / 635
页数：5
相关论文
共 50 条
  • [21] Creep behaviour of inconel 718 processed by laser powder bed fusion
    Xu, Zhengkai
    Hyde, C. J.
    Tuck, C.
    Clare, A. T.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2018, 256 : 13 - 24
  • [22] Laser powder bed fusion of Inconel 718 on 316 stainless steel
    Chen, Wei-Ying
    Zhang, Xuan
    Li, Meimei
    Xu, Ruqing
    Zhao, Cang
    Sun, Tao
    ADDITIVE MANUFACTURING, 2020, 36
  • [23] Effect of powder reuse on tensile, compressive, and creep strength of Inconel 718 fabricated via laser powder bed fusion
    Bhowmik, Shubhrodev
    McWilliams, Brandon A.
    Knezevic, Marko
    MATERIALS CHARACTERIZATION, 2022, 190
  • [24] Effect of Powder Recycling on Environment-Assisted Fracture of Inconel 718 Alloy Fabricated by Laser Powder Bed Fusion
    Soyoung Kim
    Masahiro Goto
    Sangshik Kim
    Metallurgical and Materials Transactions A, 2022, 53 : 211 - 224
  • [25] Spatter and oxide formation in laser powder bed fusion of Inconel 718
    Gasper, A. N. D.
    Szost, B.
    Wang, X.
    Johns, D.
    Sharma, S.
    Clare, A. T.
    Ashcroft, I. A.
    ADDITIVE MANUFACTURING, 2018, 24 : 446 - 456
  • [26] Effect of Powder Recycling on Environment-Assisted Fracture of Inconel 718 Alloy Fabricated by Laser Powder Bed Fusion
    Kim, Soyoung
    Goto, Masahiro
    Kim, Sangshik
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2022, 53 (01): : 211 - 224
  • [27] Numerical investigation of balling defects in laser-based powder bed fusion of metals with Inconel 718
    Zoeller, C.
    Adams, N. A.
    Adami, S.
    ADDITIVE MANUFACTURING, 2023, 73
  • [28] Effects of Magnetic Abrasive Finishing on Microstructure and Mechanical Properties of Inconel 718 Processed by Laser Powder Bed Fusion
    Zhao, Yunhao
    Ratay, Jason
    Li, Kun
    Yamaguchi, Hitomi
    Xiong, Wei
    JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2022, 6 (02):
  • [29] Fast neutron irradiation-induced hardening in Inconel 625 and Inconel 718 fabricated via laser powder bed fusion
    Andurkar, M.
    O'Donnell, V.
    Keya, T.
    Prorok, B. C.
    Gahl, J.
    Thompson, S. M.
    PROGRESS IN ADDITIVE MANUFACTURING, 2025, 10 (02) : 1659 - 1670
  • [30] The Effect of Precipitates on the Stress Rupture Properties of Laser Powder Bed Fusion Inconel 718 Alloy
    Du, Jinhong
    Cheng, Wenhao
    Sun, Yiming
    Ma, Rui
    Liu, Hongbing
    Song, Xiaoguo
    Yang, Jin
    Tan, Caiwang
    COATINGS, 2023, 13 (12)
12345