A new approach to assessing carbon fiber/epoxy interfacial shear strength by tensile test of 45° fiber bundle composites: Experiment, modeling and applicability

被引：25

作者：

Qi, Guocheng ^{[1
]}

Du, Shanyi ^{[1
,2
]}

Zhang, Boming ^{[1
]}

Yu, Yalin ^{[1
]}

机构：

[1] Beihang Univ, Sch Mat Sci & Engn, Beijing 100191, Peoples R China

[2] Harbin Inst Technol, Ctr Composite Mat & Struct, Harbin 150001, Peoples R China

来源：

COMPOSITES SCIENCE AND TECHNOLOGY | 2016年 / 129卷

关键词：

Carbon fibers; Interfacial strength; Multiscale modeling; REINFORCED COMPOSITES; MECHANICAL-PROPERTIES; EPOXY COMPOSITES; MATRIX; INTERPHASE; FAILURE; BEHAVIOR; LOAD;

D O I：

10.1016/j.compscitech.2016.04.032

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

This work concentrates on the assessment of carbon fiber/epoxy interfacial shear strength by 45 degrees fiber bundle tensile (45FBT) test. The 45FBT samples for three different carbon fiber/epoxy systems were prepared and tested. The multiscale model based on the generalized methods of cells (GMC) was established to simulate the tensile damage process and analyze the interfacial stress state. The interfacial shear strength in 45FBT specimen was calculated. The 45FBT test was compared with the transverse fiber bundle tensile (TFBT) test. The applicability of the 45FBT test was finally discussed. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：214 / 221

页数：8

共 50 条

[41] The Effects of Fiber Volume Fraction on the Experiment Modal Behavior of 45°/-45° Carbon Fiber Plain Woven Fabric/Epoxy Resin Composites
Liu, Qian
Pei, Xiaoyuan
Li, Jialu
ADVANCED COMPOSITE MATERIALS AND MANUFACTURING ENGINEERING, 2012, 583 : 150 - +
[42] SHEAR-STRENGTH OF POLYMERS AND FIBER COMPOSITES .2. CARBON/EPOXY PULTRUSIONS
LIU, K
PIGGOTT, MR
COMPOSITES, 1995, 26 (12): : 841 - 848
[43] Determination of Carbon Fiber Strength Distribution Using Bundle Fiber Tensile Test: Correction of Measurement System Elongation and Kinetic Friction Between Fibers in the Fiber Bundle
Sugimoto, Yoshiki
Imai, Yusuke
Hojo, Masaki
Shimamoto, Daisuke
Hotta, Yuji
JOURNAL OF MATERIALS RESEARCH, 2021, 36 (04) : 961 - 969
[44] Effect of carbon nanotubes on the interfacial shear strength of T650 carbon fiber in an epoxy matrix
Sager, R. J.
Klein, P. J.
Lagoudas, D. C.
Zhang, Q.
Liu, J.
Dai, L.
Baur, J. W.
COMPOSITES SCIENCE AND TECHNOLOGY, 2009, 69 (7-8) : 898 - 904
[45] Determination of Carbon Fiber Strength Distribution Using Bundle Fiber Tensile Test: Correction of Measurement System Elongation and Kinetic Friction Between Fibers in the Fiber Bundle
Yoshiki Sugimoto
Yusuke Imai
Masaki Hojo
Daisuke Shimamoto
Yuji Hotta
Journal of Materials Research, 2021, 36 : 961 - 969
[46] Effect of Morphology of ZnO Nanowire Arrays on Interfacial Shear Strength in Carbon Fiber Composites
Galan, Ulises
Ehlert, Gregory J.
Lin, Yirong
Sodano, Henry A.
FUNCTIONAL METAL-OXIDE NANOSTRUCTURES, 2009, 1174 : 89 - 94
[47] A Non-Saturation Approach for Obtaining the Fiber-Matrix Interfacial Shear Strength in Glass Fiber Composites
Holmes, Gale A.
Powell, Louise A. Ahure'
SAMPE JOURNAL, 2025, 61 (01) : 20 - 28
[48] Carbon Fiber/Epoxy Interfacial Shear Strength: Effects of Plasma Surface Treatment and Nanoparticle Addition
Netravali, A. N.
POLYMER SURFACE MODIFICATION: RELEVANCE TO ADHESION, VOL 5, 2009, : 237 - 253
[49] Multiscale Carbon Nanotube-Carbon Fiber Reinforcement for Advanced Epoxy Composites with High Interfacial strength
Mei, Lei
Li, Yibin
Wang, Rongguo
Wang, Chao
Peng, Qingyu
He, Xiaodong
POLYMERS & POLYMER COMPOSITES, 2011, 19 (2-3): : 107 - 112
[50] Modeling the effects of interfacial properties on the temperature dependent tensile strength of fiber reinforced polymer composites
Li, Ying
Li, Weiguo
Shao, Jiaxing
Deng, Yong
Kou, Haibo
Ma, Jianzuo
Zhang, Xianhe
Zhang, Xuyao
Chen, Liming
Qu, Zhaoliang
COMPOSITES SCIENCE AND TECHNOLOGY, 2019, 172 : 74 - 80

← 1 2 3 4 5 →