Mechanical properties and tribological behavior of aluminum matrix composites reinforced with in-situ AlB2 particles

被引：75
|
作者：
Yuan, Linlin [1 ]
Han, Jingtao [1 ]
Liu, Jing [1 ]
Jiang, Zhengyi [2 ]
机构：
[1] Univ Sci & Technol Beijing, Sch Mat Sci & Engn, Beijing 100083, Peoples R China
[2] Univ Wollongong, Sch Mech Mat & Mechatron Engn, Wollongong, NSW 2500, Australia
来源：
TRIBOLOGY INTERNATIONAL | 2016年 / 98卷
关键词：
Aluminum matrix composites; AlB2; reinforcement; Powder metallurgy; Wear; SLIDING WEAR BEHAVIOR; AL2O3; ALLOY; FABRICATION; EXTRUSION; FRICTION; POWDERS;
D O I：
10.1016/j.triboint.2016.01.046
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Aluminum matrix composites (AMCs) reinforced with in-situ AlB2 particles have been fabricated using a combination of powder metallurgy, hot rolling and solution treatment. The effects of boron content (7 and 12 wt%), hot rolling and heat treatment parameters on the microstructures and mechanical properties of the composites were investigated by means of scanning electron microscopy (SEM), tensile test and micro-hardness measurements. The friction coefficient, wear behavior and scratch morphology of the AMCs and pure aluminum were also studied using scratch tests. The hardness and wear properties are higher in a case of composites when compared to unreinforced matrix material. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码：41 / 47
页数：7
相关论文
共 50 条
  • [41] Microstructure and mechanical behavior of AA2024 aluminum matrix composites reinforced with in situ synthesized ZrB2 particles
    Muralidharan, N.
    Chockalingam, K.
    Dinaharan, I.
    Kalaiselvan, K.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 735 : 2167 - 2174
  • [42] Microstructure and mechanical behavior of AA2024 aluminum matrix composites reinforced with in situ synthesized ZrB2 particles
    Muralidharan, N. (murali21.nm@gmail.com), 1600, Elsevier Ltd (735):
  • [43] Microstructure and Mechanical Properties of In Situ AlB2/A356 Composites Under T6 Treatment
    Jiao, Lei
    Wang, BaoWang
    Zhao, Yutao
    Li, Fan
    Wang, ZhiWen
    Li, Hui
    INTERNATIONAL JOURNAL OF METALCASTING, 2023, 17 (02) : 1082 - 1094
  • [44] Mechanical and Tribological Properties of Sintered Aluminum Matrix Al–Sn Composites Reinforced with Al3Fe Particles
    N. M. Rusin
    A. L. Skorentsev
    Physics of Metals and Metallography, 2021, 122 : 1248 - 1255
  • [45] Microstructures and Mechanical Properties of Multiphase-Reinforced In Situ Aluminum Matrix Composites
    Ju-Hye Kim
    Jae-Gil Jung
    Eun-Ji Baek
    Yoon Suk Choi
    Kwangjun Euh
    Metals and Materials International, 2019, 25 : 353 - 363
  • [46] Microstructures and Mechanical Properties of Multiphase-Reinforced In Situ Aluminum Matrix Composites
    Kim, Ju-Hye
    Jung, Jae-Gil
    Baek, Eun-Ji
    Choi, Yoon Suk
    Euh, Kwangjun
    METALS AND MATERIALS INTERNATIONAL, 2019, 25 (02) : 353 - 363
  • [47] Structure, Physical and Mechanical Properties of Aluminum Matrix Composites Reinforced with Carbide Particles
    S. V. Gladkovskii
    S. V. Petrova
    T. S. Cherkasova
    A. M. Patselov
    Metal Science and Heat Treatment, 2023, 65 : 54 - 61
  • [48] Mechanical Properties and Reinforcement Mechanism of Amorphous Particles Reinforced Aluminum Matrix Composites
    Wang, Jinxiang
    Zhao, Ruijin
    Zhang, Xiaoli
    APPLIED MECHANICS AND MANUFACTURING TECHNOLOGY, 2011, 87 : 38 - +
  • [49] Structure, Physical and Mechanical Properties of Aluminum Matrix Composites Reinforced with Carbide Particles
    Gladkovskii, S. V.
    Petrova, S. V.
    Cherkasova, T. S.
    Patselov, A. M.
    METAL SCIENCE AND HEAT TREATMENT, 2023, 65 (1-2) : 54 - 61
  • [50] Microstructure and mechanical properties of AlN particles in situ reinforced Mg matrix composites
    Yang, Changlin
    Zhang, Bin
    Zhao, Dongchen
    Lu, Hebin
    Zhai, Tongguang
    Liu, Feng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 674 : 158 - 163
12345