Optimization of Machining Parameters for CNC Turning of different Materials

被引：6

作者：

Saini, Surendra Kumar ^{[1
]}

Pradhan, Sharad Kumar ^{[1
]}

机构：

[1] Natl Inst Tech Teachers Training & Res, Dept Mech Engn, Bhopal 462002, MP, India

来源：

DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH | 2014年 / 592-594卷

关键词：

CNC turning parameters; Optimization; Surface roughness; Fractional Factorial Design Method;

D O I：

10.4028/www.scientific.net/AMM.592-594.605

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This paper proposes an experimental investigation of the most influencing machining parameters like spindle speed, feed rate and depth of cut on CNC turning of three metals viz. 316L Stainless steel, EN24 alloy steel and Ti 6 Al 4V alloy. Fractional factorial design with orthogonal array [L-9 (3(3))] is employed for the optimization of these turning process parameters. All experiments were carried out using EMCO CNC 250 Turn machine with carbide cutting tool. The comparison revealed that feed rate and depth of cut are the most significant turning factors on surface roughness followed by spindle speed for these three metals.

引用

页码：605 / 609

页数：5

共 50 条

[41] Multi objective optimization of CNC turning process parameters with Acrylonitrile Butadiene Styrene material
Bharathi, S. R. Sundara
Ravindran, D.
Moshi, A. Arul Marcel
Rajeshkumar, R.
Palanikumar, R.
MATERIALS TODAY-PROCEEDINGS, 2020, 27 : 2042 - 2047
[42] CNC turning process parameters optimization on Aluminium 6082 alloy by using Taguchi and ANOVA
Palaniappan, S. P.
Muthukumar, K.
Sabariraj, R. V.
Kumar, S. Dinesh
Sathish, T.
MATERIALS TODAY-PROCEEDINGS, 2020, 21 : 1013 - 1021
[43] Machining process parameters optimization method for heavy-duty CNC machine tools
State Key Lab of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan 430074, China
不详
Jisuanji Jicheng Zhizao Xitong, 4 (729-737):
[44] A method integrating Taguchi, RSM and MOPSO to CNC machining parameters optimization for energy saving
Li, Congbo
Xiao, Qinge
Tang, Ying
Li, Li
JOURNAL OF CLEANER PRODUCTION, 2016, 135 : 263 - 275
[45] OPTIMIZATION OF MACHINING PARAMETERS IN TURNING OPERATION USING COMBINED TOPSIS AND AHP METHOD
Singaravel, Balasubramaniyan
Selvaraj, Thangiah
TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2015, 22 (06): : 1475 - 1480
[46] Intelligent optimization and selection of machining parameters in finish turning and facing of Inconel 718
J. S. Senthilkumaar
P. Selvarani
R. M. Arunachalam
The International Journal of Advanced Manufacturing Technology, 2012, 58 : 885 - 894
[47] Optimization of controllable turning parameters for high speed dry machining of a super alloy
Satyanatayana, B.
Nitin, P. Ruthvik
Reddy, M. Dileep
MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 4878 - 4886
[48] Hard Finish Turning Parameters Optimization for Machining of High Temperature Stainless Steel
Maniraj, J.
Selladurai, V.
Sivashanmugam, N.
Vendan, S. Arungalai
Myilswamy, S.
HIGH TEMPERATURE MATERIALS AND PROCESSES, 2012, 31 (06) : 679 - 689
[49] Intelligent optimization and selection of machining parameters in finish turning and facing of Inconel 718
Senthilkumaar, J. S.
Selvarani, P.
Arunachalam, R. M.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 58 (9-12): : 885 - 894
[50] Hard finish turning parameters optimization for machining of high temperature stainless steel
Maniraj, J. (maniraj_j@rediffmail.com), 1600, Walter de Gruyter GmbH (31):

← 1 2 3 4 5 →