The Development of LED-Based Dental Light Using a Multiplanar Reflector Design

被引：4
|
作者：
Hsieh, Chi-Chang [1 ]
Li, Yan-Huei [2 ]
机构：
[1] Natl Kaohsiung First Univ Sci & Technol, Dept Mech & Automat Engn, Kaohsiung 824, Taiwan
[2] Natl Kaohsiung First Univ Sci & Technol, Inst Engn Sci & Technol, Kaohsiung 824, Taiwan
来源：
INTERNATIONAL JOURNAL OF PHOTOENERGY | 2014年 / 2014卷
关键词：
D O I：
10.1155/2014/957079
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
A multiplanar reflector was designed to enhance the application efficiency of light-emitting diode (LED) light sources that can be employed as LED-based dental lights. This study used a high-power LED developed by Nichia, that is, a single LED capable of providing a total luminous flux of 120 lm, as the primarily light source to design and develop an LED-based dental light. This LED complies with the international standards and regulations stipulated in ISO 9680:2007. The light spots produced by the prototype were rectangular, with a length of 200 mm and a width of 100 mm. These light spots achieved maximum illumination of 12,000 lux. The use of LEDs can reduce energy consumption from 50W to 3W, providing an energy saving of more than 90%.
引用
收藏
页数：6
相关论文
共 50 条
  • [31] Progress in extremely high brightness LED-based light sources
    Hoelen, Christoph
    Antonis, Piet
    de Boer, Dick
    Koole, Rolf
    Kadijk, Simon
    Li, Yun
    Vanbroekhoven, Vincent
    Van de Voorde, Patrick
    SIXTEENTH INTERNATIONAL CONFERENCE ON SOLID STATE LIGHTING AND LED-BASED ILLUMINATION SYSTEMS, 2017, 10378
  • [32] LED-Based Visible Light Communication and Positioning Technology and SoCs
    Lang, Tian
    Li, Zening
    Lu, Fei
    Dong, Zongyu
    Wang, Li
    Li, Cheng
    Zhang, Feilong
    Chen, Gang
    Wang, Albert
    2018 14TH IEEE INTERNATIONAL CONFERENCE ON SOLID-STATE AND INTEGRATED CIRCUIT TECHNOLOGY (ICSICT), 2018, : 259 - 262
  • [33] Rational selection of light sources for LED-based solar simulators
    Vosylius, Zygimantas
    Antonovic, Darius
    Novickovas, Algirdas
    Gaubas, Eugenijus
    Tamosiunas, Vincas
    SOLAR ENERGY, 2023, 265
  • [34] On the thermal characterization of an RGB LED-based white light module
    Cheng, Hsien-Chie
    Lin, Jia-Yun
    Chen, Wen-Hwa
    APPLIED THERMAL ENGINEERING, 2012, 38 : 105 - 116
  • [35] Design, fabrication, and characterization of a tunable LED-based illuminator using refractive freeform arrays
    Shadalou, Shohreh
    Gurganus, Dustin
    Cassarly, William J.
    Davies, Matthew A.
    Suleski, Thomas J.
    OPTICS EXPRESS, 2022, 30 (23) : 42749 - 42761
  • [36] Design of an LED-based headlamp low-beam system using combined prisms
    Qiu, P.
    Ge, A.
    Wang, J.
    Cai, J.
    Zhu, L.
    Du, Z.
    LIGHTING RESEARCH & TECHNOLOGY, 2015, 47 (02) : 248 - 253
  • [37] A Novel Approach to Using Energy-Efficient LED-Based Visible Light Communication in Hospitals
    Vijayalakshmi, B. Anitha
    Sudha, M. Nesa
    INTELLIGENT AND EFFICIENT ELECTRICAL SYSTEMS, 2018, 446 : 197 - 204
  • [38] Design and implementation of organic LED-based displays for signage application
    Sharma, Pratibha
    Kwok, Harry
    INTERNATIONAL OPTICAL DESIGN CONFERENCE 2006, PTS 1 AND 2, 2006, 6342
  • [39] Achromatic LED-based projection lens design for automobile headlamp
    Ma, Shih-Hsin
    Lee, Chi-Hung
    Yang, Chia-Hsian
    OPTIK, 2019, 191 (89-99): : 89 - 99
  • [40] Development and characterization of an LED-based detector for dosimetry in diagnostic radiology
    Damulira, Edrine
    Yusoff, Muhammad Nur Salihin
    Omar, Ahmad Fairuz
    Mohd Taib, Nur Hartini
    PHYSICS IN MEDICINE AND BIOLOGY, 2021, 66 (08):
12345