Fabrication of Indium Tin Oxide targets by Spark Plasma Sintering and Hot-Pressing Sintering

被引：3
|
作者：
Guo, Wei [1 ]
Wang, Weimin [1 ]
Wang, Hao [1 ]
Wang, Yucheng [1 ]
Fu, Zhengyi [1 ]
机构：
[1] Wuhan Univ Technol, State Key Lab Adv Technol Mat Synth & Proc, Wuhan 430070, Peoples R China
来源：
ADVANCED SYNTHESIS AND PROCESSING TECHNOLOGY FOR MATERIALS | 2009年 / 66卷
关键词：
Fabrication; Sintering; densification; ITO; SnO2; ITO;
D O I：
10.4028/www.scientific.net/AMR.66.96
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The Indium Tin Oxide(ITO) is known as a poorly sinterable material The Spark Plasma Sintering(SPS) and the hot-pressing sintering(HP) were used to fabricate Indium Tin Oxide Ceramics from ITO nanoparticles. The maximum bulk density of 7 02 g/cm(2)(relative density; 98.2% TD)was obtained when sintered in Ar at 1000 degrees C for lmin by SPS sintering While the bulk density of 7 08 g/cm(2)(relative density, 99% TD) was obtained when sintered in Ar at 1050 degrees C for 4h by HP sintering
引用
收藏
页码：96 / 99
页数：4
相关论文
共 50 条
  • [31] Fabrication and properties of HfB2-MoSi2 composites produced by hot pressing and spark plasma sintering
    Sciti, Diletta
    Silvestroni, Laura
    Bellosi, Alida
    JOURNAL OF MATERIALS RESEARCH, 2006, 21 (06) : 1460 - 1466
  • [32] Identification of densification mechanisms of pressure-assisted sintering: application to hot pressing and spark plasma sintering of alumina
    G. Antou
    P. Guyot
    N. Pradeilles
    M. Vandenhende
    A. Maître
    Journal of Materials Science, 2015, 50 : 2327 - 2336
  • [33] Hot pressing and spark plasma sintering of alumina: Discussion about an analytical modelling used for sintering mechanism determination
    Guyot, P.
    Antou, G.
    Pradeilles, N.
    Weibel, A.
    Vandenhende, M.
    Chevallier, G.
    Peigney, A.
    Estournes, C.
    Maitre, A.
    SCRIPTA MATERIALIA, 2014, 84-85 : 35 - 38
  • [34] Identification of densification mechanisms of pressure-assisted sintering: application to hot pressing and spark plasma sintering of alumina
    Antou, G.
    Guyot, P.
    Pradeilles, N.
    Vandenhende, M.
    Maitre, A.
    JOURNAL OF MATERIALS SCIENCE, 2015, 50 (05) : 2327 - 2336
  • [35] Low temperature spark plasma sintering of tin oxide doped with tantalum oxide
    Yoshida, Hidehiro
    Morita, Koji
    Kim, Byung-Nam
    Soga, Kohei
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2016, 124 (09) : 932 - 937
  • [36] ON THE COMPARISON OF ADDITIVE-FREE HfB2-SiC CERAMICS SINTERED BY REACTIVE HOT-PRESSING AND SPARK PLASMA SINTERING
    Monteverde, Frederic
    Bellosi, Alida
    DEVELOPMENTS IN ADVANCED CERAMICS AND COMPOSITES, 2005, 26 (08): : 295 - 302
  • [37] Comparative Study on Electrical Conductivity of CeO2-Doped AlN Ceramics Sintered by Hot-Pressing and Spark Plasma Sintering
    Coeffe-Desvaux, Mickael
    Pradeilles, Nicolas
    Marchet, Pascal
    Vandenhende, Marion
    Joinet, Mickael
    Maitre, Alexandre
    MATERIALS, 2022, 15 (07)
  • [38] ALUMINUM TITANATE TITANIA CERAMICS SYNTHESIZED BY SINTERING AND HOT-PRESSING
    STAMENKOVIC, I
    CERAMICS INTERNATIONAL, 1989, 15 (03) : 155 - 160
  • [39] ALUMINA MICROSTRUCTURAL BEHAVIOR UNDER PRESSURELESS SINTERING AND HOT-PRESSING
    ROY, JF
    DESCEMOND, M
    BRODHAG, C
    THEVENOT, F
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 1993, 11 (04) : 325 - 333
  • [40] Investigation of γ-alon Structural Evolution During Sintering and Hot-Pressing
    Zientara, Dariusz
    Bucko, Miroslaw M.
    Lis, Jerzy
    FRACTOGRAPHY OF ADVANCED CERAMICS III, 2009, 409 : 313 - 316
12345