Functionally graded ultra-high temperature ceramics: From thermo-elastic numerical analysis to damage tolerant composites

To maximize the toughening contributions due to fiber bridging and residual stresses upon layering, ultra-high temperature ceramics containing variable amounts of short carbon fiber in functionally graded stacking sequences were designed and characterized. Stress fields evaluated by finite element model on (AB)(n)A and more complex asymmetric architectures were compared to the experimental fracture toughness pointing to an effective toughness increment in those structures where the notch fell in zones of residual compression. For the best composite, toughness at room temperature achieved 7 MPa center dot m(0.5) and further increased to 10 MPa center dot m(0.5) when tested at 1500 degrees C within a light ZrB2-based composite with density below 4 g/cm(3). According to the numerical simulations and the effective microstructural features of the composites, the main guidelines for the realization of ceramics with simultaneous failure tolerance and ablation resistance were established. (c) 2022 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).