Thin films of oxygen-deficient perovskite phases by pulsed-laser ablation of strontium titanate

被引:97
|
作者
Perez-Casero, R.
Perriere, J.
Gutierrez-Llorente, A.
Defourneau, D.
Millon, E.
Seiler, W.
Soriano, L.
机构
[1] Univ Paris 06, Inst Nanosci Paris, CNRS, UMR 7588, F-75015 Paris, France
[2] Univ Orleans, CNRS, GREMI, UMR 6606, F-45067 Orleans 2, France
[3] CNRS, LM3, UMR 8006, ENSAM, F-75013 Paris, France
[4] Univ Autonoma Madrid, Fac Ciencias, Dept Fis Aplicada, E-28049 Madrid, Spain
关键词
D O I
10.1103/PhysRevB.75.165317
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
An oxygen-deficient phase has been formed by pulsed-laser ablation of strontium titanate under vacuum conditions (10(-7) mbar). By the complementary use of Rutherford backscattering spectrometry and x-ray diffraction, the composition and structure of films were determined. A large oxygen deficiency is revealed in the films as the corresponding formula is SrTiO2.5. This understoichiometry means that Ti3+ are present in such films, while only Ti4+ is observed in stoichiometric compound (SrTiO3). The presence of Ti3+ species in the SrTiO2.5 films was checked by x-ray absorption spectroscopy. The SrTiO2.5 films were found to crystallize in the cubic perovskite structure with a lattice parameter of 0.40 nm, considerably higher than that of the stoichiometric compound (0.39 nm). The SrTiO2.5 films were epitaxially grown on MgO single-crystal substrates, with a "cube-on-cube" in-plane orientation with the substrate. In contrary to stoichiometric SrTiO3 films which are perfectly insulating, the SrTiO2.5 films were found to be conductor or semiconductor at room temperature, depending on the growth temperature. Resistivities at room temperature in the 10(-3)-10(-2) Omega cm range are thus obtained.
引用
收藏
页数:7
相关论文
共 50 条
  • [41] Growth model for pulsed-laser deposited perovskite oxide films
    Wang Xu
    Fei Yi-Yan
    Zhu Xiang-Dong
    Lu Hui-Bin
    Yang Guo-Zhen
    CHINESE PHYSICS LETTERS, 2008, 25 (02) : 663 - 666
  • [42] Growth of ZrSnTiO thin films by pulsed-laser deposition
    Nistor, M.
    Ioachim, A.
    Gallas, B.
    Defourneau, D.
    Perriere, J.
    Seiler, W.
    JOURNAL OF PHYSICS-CONDENSED MATTER, 2007, 19 (09)
  • [43] The fabrication of TiNi thin films by pulsed-laser deposition
    Chen, XY
    Lu, YF
    Ren, ZM
    Zhu, S
    SECOND INTERNATIONAL SYMPOSIUM ON LASER PRECISION MICROFABRICATION, 2002, 4426 : 225 - 228
  • [44] PULSED-LASER DEPOSITION CREATES THIN-FILMS
    HOBBS, JR
    LASER FOCUS WORLD, 1993, 29 (11): : 34 - &
  • [45] Structural formation of the lead zirconate titanate in use of pulsed-laser ablation deposition
    Ichiki, M
    Zhang, L
    Wang, Z
    Morikawa, Y
    Tanaka, M
    Maeda, R
    COMPLEX MEDIUMS II: BEYOND LINEAR ISOTROPIC DIELECTRICS, 2001, 4467 : 387 - 394
  • [46] PROPERTIES OF SILICON DIOXIDE FILMS PREPARED BY PULSED-LASER ABLATION
    SLAOUI, A
    FOGARASSY, E
    FUCHS, C
    SIFFERT, P
    JOURNAL OF APPLIED PHYSICS, 1992, 71 (02) : 590 - 596
  • [47] Growth of SrS thin films by pulsed-laser deposition
    Karner, C
    Maguire, P
    McLaughlin, J
    Laverty, S
    Graham, WG
    Morrow, T
    Bowman, RM
    PHILOSOPHICAL MAGAZINE LETTERS, 1997, 76 (02) : 111 - 116
  • [48] THE PULSED-LASER DEPOSITION OF SUPERCONDUCTING THIN-FILMS
    SINGH, RK
    NARAYAN, J
    JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 1991, 43 (03): : 13 - 20
  • [49] Electrical properties and microstructure of lead zirconate titanate (PZT) thin films deposited by pulsed-laser deposition
    Wang, ZJ
    Kokawa, H
    Maeda, R
    CERAMICS INTERNATIONAL, 2004, 30 (07) : 1529 - 1533