Cracking in D6ac steel

被引：7

作者：

Jones, R. ^{[1
,2
]}

Forth, S. C. ^{[3
]}

机构：

[1] Monash Univ, DSTO Ctr Expertise Struct Mech, Dept Mech & Aerosp Engn, Clayton, Vic 3800, Australia

[2] Monash Univ, CRC Railway Technol, Dept Mech & Aerosp Engn, Clayton, Vic 3800, Australia

[3] NASA, Lyndon B Johnson Space Ctr, Houston, TX USA

来源：

THEORETICAL AND APPLIED FRACTURE MECHANICS | 2010年 / 53卷 / 01期

关键词：

Crack closure; Fatigue crack growth; Similitude; Frost-Dugdale; D6ac steel; FATIGUE CRACKS; GROWTH;

D O I：

10.1016/j.tafmec.2009.12.005

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This paper examines the results of an extensive test program undertaken to study crack growth in D6ac steel and shows that in each case the increment in the crack length per cycle (da/dN) conforms to the Generalised Frost-Dugdale crack growth law. This is found to be true for both constant K(max), constant R ratio load increasing, and compression compression pre-cracking tests in the L-T, T-L and the S-T directions. (C) 2010 Elsevier Ltd. All rights reserved.

引用

页码：61 / 64

页数：4

共 50 条

[31] Effect of Bainite Morphology on Mechanical Properties of the Mixed Bainite-martensite Microstructure in D6AC Steel
Khodamorad Abbaszadeh
Hassan Saghafian
Shahram Kheirandish
Journal of Materials Science & Technology, 2012, 28 (04) : 336 - 342
[32] D6AC钢冲击值偏低原因分析
陈东方
特钢技术, 2001, (01) : 15 - 19
[33] D6AC钢表面裂纹扩展速率测定
曹少芳
郭为民
宇航材料工艺, 1987, (03) : 46 - 48
[34] D6AC钢的动态力学性能研究
胡昌明
贺红亮
胡时胜
兵器材料科学与工程, 2003, (02) : 26 - 29
[35] D6AC钢用高韧性焊丝的研制
虞金林
杨珍华
刘淑芬
黄思明
宇航材料工艺, 1984, (01) : 25 - 31+24
[36] D6AC 钢助推器壳体试制工艺
张芝祥
罗琴英
王孟平
刘玉珍
潘冶
宇航材料工艺, 1984, (06) : 25 - 29
[37] Fracture responses of microstructures of electron beam-welded D6AC
Wu, Shyh-Chi
Wen, Hua-Chiang
Wu, Ming-Jhang
Chou, Chang-Pin
VACUUM, 2012, 86 (12) : 1828 - 1833
[38] 回火对D6AC钢板缺口性能的影响
Robert N·Katz
榕江
国外导弹技术, 1984, (12) : 70 - 79
[39] D6AC超高强度钢的性能研究
陈开忠
四川冶金, 1992, (02) : 30 - 34
[40] 分形维数与D6AC钢的韧性
魏成富，李静媛，严范梅，汪天富，田继丰
材料科学与工程, 1995, (03) : 35 - 40+54

← 1 2 3 4 5 →