Investigation on mechanical properties of automobile strut made by GFRP composites

被引：4
|
作者：
Marichelvam, M. K. [1 ]
Kandakodeeswaran, K. [1 ]
Maheswaran, K. [1 ]
Geetha, M. [2 ]
机构：
[1] Mepco Schlenk Engn Coll, Dept Mech Engn, Sivakasi 626005, India
[2] Kamaraj Coll Engn & Technol, Dept Math, Madurai 625701, Tamil Nadu, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2021年 / 45卷
关键词：
GFRP composite; Impact test; Automobile strut; Dynamic characteristics; Finite element analysis; FIBER; DESIGN;
D O I：
10.1016/j.matpr.2020.06.026
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The strut bar is one of the most crucial mechanical parts used in the moving parts of automobiles where high hardness is required. In this work, the numerical and experimental analyses of a strut bar which is made of a Glass Fiber Reinforced Polymer (GFRP) composite are performed. The GFRP composite strut bar is fabricated and the experimental results are taken by performing various tests such as tensile, compression, and impact, flexural according to ASTM standards. Then, the numerical analysis is also carried out for the conventional and the fabricated struts using the finite element analysis software. The GFRP composite strut model shows improvement in specific strength and specific modulus. (c) 2021 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the scientific committee of the International Conference on Advances in Materials Research-2019.
引用
收藏
页码：1338 / 1347
页数：10
相关论文
共 50 条
  • [21] EFFECT OF DRILLING PARAMETERS ON THE FINISH AND MECHANICAL-PROPERTIES OF GFRP COMPOSITES
    TAGLIAFERRI, V
    CAPRINO, G
    DITERLIZZI, A
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1990, 30 (01): : 77 - 84
  • [22] Influence of SMA Short Fibers on Mechanical Properties of Copper/GFRP Composites
    Pazhanivel, K.
    Bhaskar, G. B.
    Venkatesan, N.
    Anandan, P.
    Arunachalam, S.
    ADVANCED MANUFACTURING RESEARCH AND INTELLIGENT APPLICATIONS, 2014, 591 : 64 - +
  • [23] Mechanical properties of sandwich composite made of syntactic foam core and GFRP skins
    Salleh, Zulzamri
    Islam, Md Mainul
    Epaarachchi, Jayantha Ananda
    Su, Haibin
    AIMS MATERIALS SCIENCE, 2016, 3 (04) : 1704 - 1727
  • [24] Investigation on the mechanical properties of natural composites made with Indian almond fiber and neem seed particulates
    Babu, Bichu
    Raj, J. Bensam
    Raj, R. Jeya
    Xavier, X. Roshan
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2023, 237 (17) : 3908 - 3915
  • [25] On the Influence of the Functionalization of Graphene Nanoplatelets and Glass Fiber on the Mechanical Properties of GFRP Composites
    Veerakumar, Vigneshwaran Gnanakkan Samuel
    Shanmugavel, Balasivanandha Prabu
    Harish, Sivasankaran
    APPLIED COMPOSITE MATERIALS, 2021, 28 (04) : 1127 - 1152
  • [26] On the Influence of the Functionalization of Graphene Nanoplatelets and Glass Fiber on the Mechanical Properties of GFRP Composites
    Vigneshwaran Gnanakkan Samuel Veerakumar
    Balasivanandha Prabu Shanmugavel
    Sivasankaran Harish
    Applied Composite Materials, 2021, 28 : 1127 - 1152
  • [27] COMBINATORIAL INVESTIGATION OF MECHANICAL PROPERTIES OF BIOMIMICKED COMPOSITES
    Allameh, Seyed M.
    Miller, Roger
    Almuzaini, Abdullah
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION - 2019, VOL 12: ADVANCED MATERIALS: DESIGN, PROCESSING, CHARACTERIZATION, AND APPLICATIONS, 2020,
  • [28] A study on the mechanical properties of the honeycomb sandwich composites made by VARTM
    Eum, SH
    Kim, YH
    Han, JW
    Kim, KJ
    Shin, DH
    Yim, CM
    Murakami, R
    ADVANCES IN FRACTURE AND STRENGTH, PTS 1- 4, 2005, 297-300 : 2746 - 2751
  • [29] MECHANICAL PROPERTIES OF THERMOPLASTIC COMPOSITES MADE BY AUTOMATED FIBER PLACEMENT
    Minh Duc Hoang
    Simpson, Jeffrey Fortin
    Suong Van Hoa
    20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015,
  • [30] Mechanical properties of carbon composites made using an inorganic polymer
    Foden, AJ
    Balaguru, P
    Lyon, R
    ANTEC '96: PLASTICS - RACING INTO THE FUTURE, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPACIAL AREAS, 1996, 42 : 3013 - 3017
12345