Poisson's ratio and porosity of carbon nanotube dry-spun yarns

被引:110
|
作者
Miao, Menghe [1 ]
McDonnell, Jill [1 ]
Vuckovic, Lucy [1 ]
Hawkins, Stephen C. [1 ]
机构
[1] CSIRO Mat Sci & Engn, Belmont, Vic 3216, Australia
关键词
CHEMICAL-VAPOR-DEPOSITION; ASSISTED FABRICATION; STRENGTH; FIBERS; FORESTS; ARRAYS;
D O I
10.1016/j.carbon.2010.04.009
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
The Poisson's ratio of carbon nanotube (CNT) dry-spun yarns can be tuned over an extremely wide range of values that are up to 20-30 times higher than common solid materials. This is a result of the highly variable porosity of the yarn structure, from 90% in very low twist yarns to 40% in high twist yarns. The change of CNT geometry during the conversion from forest to web also plays an important role in the formation of CNT bundles and consequently influences the CNT dry-spun yarn structure. The CNT dry-spun yarn achieved its maximum specific strength when the CNTs on the yarn surface formed a 20 degrees angle to the yarn axis. These CNT dry-spun yarn structure-property relationships can be utilized in the design of different applications, such as tuning the sensitivity of sensors and the functional characteristics of CNT composites. Crown Copyright (C) 2010 Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:2802 / 2811
页数:10
相关论文
共 50 条
  • [21] Dry-spun carbon nanotube ultrafiltration membranes tailored by anti-viral metal oxide coatings for human coronavirus 229E capture in water
    Rashed, Ahmed O.
    Huynh, Chi
    Merenda, Andrea
    Rodriguez-Andres, Julio
    Kong, Lingxue
    Kondo, Takeshi
    Razal, Joselito M.
    Dumee, Ludovic F.
    JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING, 2023, 11 (03):
  • [22] Transparent, Flexible Heater Based on Hybrid 2D Platform of Graphene and Dry-Spun Carbon Nanotubes
    Li, Luhe
    Hong, Soon Kyu
    Jo, Yeongsu
    Tian, Mengdi
    Woo, Chae Young
    Kim, Soo Hyung
    Kim, Jong-Man
    Lee, Hyung Woo
    ACS APPLIED MATERIALS & INTERFACES, 2019, 11 (17) : 16223 - 16232
  • [23] Enhancing the strength, toughness, and electrical conductivity of twist-spun carbon nanotube yarns by π bridging
    Liang, Xiumin
    Gao, Yuan
    Duan, Jianli
    Liu, Zunfeng
    Fang, Shaoli
    Baughman, Ray H.
    Jiang, Lei
    Cheng, Qunfeng
    CARBON, 2019, 150 : 268 - 274
  • [24] Anti-fatigue and multifunctional core-spun yarns based on carbon nanotube springs
    Li, Wenya
    Xu, Changle
    Ren, Xueqin
    Xue, Yuan
    Zhao, Jingna
    Li, Qingwen
    Zhang, Xiaohua
    COMPOSITES COMMUNICATIONS, 2020, 19 : 127 - 133
  • [25] Investigation on thermal and cryogenic behaviour of carbon nanotube spun yarns using a dynamic mechanical analyser
    Jie Min
    Jackie Y. Cai
    Lijing Wang
    Journal of Materials Science, 2016, 51 : 8434 - 8441
  • [26] Thermal and electrical conductivity of array-spun multi-walled carbon nanotube yarns
    Jakubinek, Michael B.
    Johnson, Michel B.
    White, Mary Anne
    Jayasinghe, Chaminda
    Li, Ge
    Cho, Wondong
    Schulz, Mark J.
    Shanov, Vesselin
    CARBON, 2012, 50 (01) : 244 - 248
  • [27] Investigation on thermal and cryogenic behaviour of carbon nanotube spun yarns using a dynamic mechanical analyser
    Min, Jie
    Cai, Jackie Y.
    Wang, Lijing
    JOURNAL OF MATERIALS SCIENCE, 2016, 51 (18) : 8434 - 8441
  • [28] Fabrication and mechanical properties of carbon nanotube yarns spun from ultra-long multi-walled carbon nanotube arrays
    Ghemes, Adrian
    Minami, Yoshitaka
    Muramatsu, Junichi
    Okada, Morihiro
    Mimura, Hidenori
    Inoue, Yoku
    CARBON, 2012, 50 (12) : 4579 - 4587
  • [29] Structure and process-dependent properties of solid-state spun carbon nanotube yarns
    Fang, Shaoli
    Zhang, Mei
    Zakhidov, Anvar A.
    Baughman, Ray H.
    JOURNAL OF PHYSICS-CONDENSED MATTER, 2010, 22 (33)
  • [30] Study on negative Poisson's ratio structure with low porosity
    Cai, Yiqing
    Zhu, Yongsheng
    Yan, Ke
    Yuan, Qianqian
    Hong, Jun
    5TH INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY, ENVIRONMENT AND CHEMICAL ENGINEERING, 2019, 358