THE EFFECT OF PRODUCT SIZE ON THE PULLING FORCE IN PULTRUSION

被引：4

作者：

Baran, Ismet ^{[1
]}

Carlone, Pierpaolo ^{[2
]}

Hattel, Jesper H. ^{[1
]}

Palazzo, Gaetano S. ^{[2
]}

Akkerman, Remko ^{[3
]}

机构：

[1] Tech Univ Denmark, Dept Mech Engn, DK-2800 Lyngby, Denmark

[2] Univ Salerno, Dept Ind Engn, I-84084 Fisciano, Italy

[3] Univ Twente, Fac Engn Technol, NL-7500 AE Enschede, Netherlands

来源：

MATERIAL FORMING ESAFORM 2014 | 2014年 / 611-612卷

关键词：

Pultrusion process; Pulling force; Distortions; Curing; Finite element analysis; GRAPHITE/EPOXY COMPOSITES;

D O I：

10.4028/www.scientific.net/KEM.611-612.1763

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In the present work, pultrusion of a composite rod is simulated for various part thicknesses using the finite element method. The pultrusion process set-up is taken from literature in which the temperature and the degree of cure evolutions inside the rod were measured. The predicted temperature and degree of cure profiles in the three dimensional (3D) thermo-chemical analysis are found to agree well with the measured data. The contact pressure between the part and the heating die is calculated using a mechanical contact formulation in the 2D mechanical process model for 9 different part thickness values. Using the contact pressure distribution along the die, the process induced pulling force is predicted. For the simulated cases, a non-linear relation is found between the total force and the product size.

引用

页码：1763 / 1770

页数：8

共 50 条

[31] Pulling electromagnetic force induced by virtual excitation
Lepeshov, S.
Krasnok, A.
2021 FIFTEENTH INTERNATIONAL CONGRESS ON ARTIFICIAL MATERIALS FOR NOVEL WAVE PHENOMENA (METAMATERIALS), 2021, : X226 - X228
[32] Reducing the Pulling Force on Plastic Bag Rolls
Kaminishizono, Takeyoshi
PROCEEDINGS OF THE 20TH CONGRESS OF THE INTERNATIONAL ERGONOMICS ASSOCIATION (IEA 2018), VOL VII: ERGONOMICS IN DESIGN, DESIGN FOR ALL, ACTIVITY THEORIES FOR WORK ANALYSIS AND DESIGN, AFFECTIVE DESIGN, 2019, 824 : 27 - 32
[33] Optical pulling force on nonlinear nanoparticles with gain
Chen, Hongli
Gao, Lei
Zhong, Chonggui
Yuan, Guoqiu
Huang, Yanyan
Yu, Zhongwei
Cao, Min
Wang, Meng
AIP ADVANCES, 2020, 10 (01)
[34] MEASUREMENT OF THE PULLING FORCE OF A SINGLE CONTRACTILE ROOT
PUTZ, N
CANADIAN JOURNAL OF BOTANY-REVUE CANADIENNE DE BOTANIQUE, 1992, 70 (07): : 1433 - 1439
[35] Optical pulling force in the vicinity of plasmonic interfaces
Bogdanov, A. A.
Petrov, M. I.
Sukhov, S. V.
Shalin, A. S.
Dogariu, A.
2016 CONFERENCE ON LASERS AND ELECTRO-OPTICS (CLEO), 2016,
[36] Effects of a pulling force on the shape of a bound vesicle
Smith, AS
Sackmann, E
Seifert, U
EUROPHYSICS LETTERS, 2003, 64 (02): : 281 - 287
[37] Pulling angle-dependent force microscopy
Grebikova, L.
Gojzewski, H.
Kieviet, B. D.
Gunnewiek, M. Klein
Vancso, G. J.
REVIEW OF SCIENTIFIC INSTRUMENTS, 2017, 88 (03):
[38] MEASURING FEATHER PULLING FORCE IN CHICKENS WITH A POTENTIOMETER
KNAPP, BG
NEWELL, GW
POULTRY SCIENCE, 1959, 38 (05) : 1219 - 1219
[39] Pulling the plug to stop the new product drain
Boulding, W
Morgan, R
Staelin, R
JOURNAL OF MARKETING RESEARCH, 1997, 34 (01) : 164 - 176
[40] Pulling force prediction using neural networks
Jain, Rahul
Meena, Makkhan Lal
Sain, Manoj Kumar
Dangayach, Govind Sharan
INTERNATIONAL JOURNAL OF OCCUPATIONAL SAFETY AND ERGONOMICS, 2019, 25 (02) : 194 - 199

← 1 2 3 4 5 →