Experimental drop test investigation into wetdeck slamming loads on a generic catamaran hullform

被引:40
|
作者
Swidan, Ahmed [1 ,2 ]
Thomas, Giles [3 ]
Ranmuthugala, Dev [1 ]
Amin, Walid [1 ]
Penesis, Irene [1 ]
Allen, Tom [4 ]
Battley, Mark [4 ]
机构
[1] Univ Tasmania, Australian Maritime Coll, Hobart, Tas 7248, Australia
[2] Arab Acad Sci Technol & Maritime Transport, Alexandria 1029, Egypt
[3] UCL, London WC1E 7JE, England
[4] Univ Auckland, Ctr Adv Composite Mat, Auckland 1023, New Zealand
关键词
Catamaran; Slamming forces; Pressure distribution; Water impact; WATER-ENTRY; SPEED; IMPACT; BODY;
D O I
10.1016/j.oceaneng.2016.03.059
中图分类号
U6 [水路运输]; P75 [海洋工程];
学科分类号
0814 ; 081505 ; 0824 ; 082401 ;
摘要
A series of drop-test experiments was performed to investigate the hydrodynamic loads experienced by a generic wave-piercer catamaran hullform during water impacts. The experiments, which focus on the characterisation of the unsteady slam loads on an arched wetdeck, were conducted using a Servo-hydraulic Slam Testing System (SSTS) that allows the model to enter the water at a range of constant speeds up to 10 m/s. The systematic and random uncertainties associated with the drop test results are quantified in detail. The relationships between water-entry velocity and both slam force and pressure distributions are presented and discussed with a strong relationship between the slam force peak magnitudes and impact velocity being observed. In addition the three dimensionality of the water flow in these slam impact events is characterised. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码:143 / 153
页数:11
相关论文
共 25 条