The effects of annealing on severely cold-rolled equiatomic HfNbTiZr high entropy alloy

被引:19
|
作者
Tu, Chun-Hsiang [1 ]
Lai, Yi-Cheng [1 ]
Wu, Shyi-Kaan [1 ,2 ]
Lin, Yu-Hsien [1 ]
机构
[1] Natl Taiwan Univ, Dept Mat Sci & Engn, Taipei 106, Taiwan
[2] Natl Taiwan Univ, Dept Mech Engn, Taipei 106, Taiwan
关键词
Hall-Petch relation; High-entropy alloy; Indentation and hardness; Metals and alloy; Recrystallization; WEAR-RESISTANCE;
D O I
10.1016/j.matlet.2021.130526
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this study, the effects of annealing on mechanical properties and phase evolution of 80% cold-rolled equiatomic HfNbTiZr high entropy alloy (HEA) are studied. A single BCC-phase solid solution is identified in the as cold-rolled and the recrystallized state at above 700 degrees C, and its hardness increases as the annealing temperature increases. However, the HEA still follows the Hall-Petch equation according to tensile tests. When the HfNbTiZr HEA is annealed at 450 degrees C, hardness would increase, while the hardening effect on 550 degrees C annealed specimens is not so pronounced. The age hardening effect is mainly associated with the formation of HCP precipitates.
引用
收藏
页数:3
相关论文
共 50 条
  • [31] Microstructure Recrystallization and Mechanical Properties of a Cold-Rolled TiNbZrTaHf Refractory High-Entropy Alloy
    Rong, Chuan
    Yang, Jieren
    Zhao, Xiaoliang
    Huang, Ke
    Liu, Ying
    Wang, Xiaohong
    Zhu, Dongdong
    Chen, Ruirun
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2024, 37 (04) : 633 - 647
  • [32] Cryogenic electropulsing induced microstructure optimization of a cold-rolled CoCrFeMnNi high-entropy alloy
    Ben, D. D.
    Yang, H. J.
    Dong, Y. A.
    Tian, Y. Z.
    Sun, S. J.
    Meng, L. X.
    Duan, Q. Q.
    Zhang, P.
    Zhang, Z. F.
    MATERIALS CHARACTERIZATION, 2023, 195
  • [33] Microstructure Recrystallization and Mechanical Properties of a Cold-Rolled TiNbZrTaHf Refractory High-Entropy Alloy
    Chuan Rong
    Jieren Yang
    Xiaoliang Zhao
    Ke Huang
    Ying Liu
    Xiaohong Wang
    Dongdong Zhu
    Ruirun Chen
    Acta Metallurgica Sinica (English Letters), 2024, 37 : 633 - 647
  • [34] Microstructure and excess free volume of severely cold shape rolled CoCrFeNiMn high entropy alloy
    Mehranpour, Mohammad Sajad
    Shahmir, Hamed
    Nili-ahmadabadi, Mahmoud
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 840
  • [35] Effects of high magnetic field annealing on recrystallization texture of cold-rolled IF steel sheet
    Wu, Yan
    Zhao, Xiang
    He, Chang-Shu
    Zuo, Liang
    Dongbei Daxue Xuebao/Journal of Northeastern University, 2008, 29 (09): : 1287 - 1290
  • [36] ANNEALING OF A COLD-ROLLED PU-1WT PERCENT GA ALLOY
    BEITSCHER, S
    JOURNAL OF NUCLEAR MATERIALS, 1972, 45 (01) : 1 - 9
  • [37] Effect of cold-rolling strain on the evolution of annealing texture of equiatomic CoCrFeMnNi high entropy alloy
    Sathiaraj, G. Dan
    Bhattacharjee, P. P.
    MATERIALS CHARACTERIZATION, 2015, 109 : 189 - 197
  • [38] Annealing Response of a Cold-Rolled Binary Al-10Mg Alloy
    Feng, Lei
    Li, Jianguo
    Huang, Chunfa
    Huang, Jinxian
    METALS, 2019, 9 (07)
  • [39] Softening Behavior During Annealing of Overaged and Cold-rolled Aluminum Alloy 7075
    de Souza, Saul Hissaci
    Padilha, Angelo Fernando
    Kliauga, Andrea Madeira
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2019, 22 (03):
  • [40] Effect of low-temperature annealing on two-different severely cold-rolled steels
    Poddar, Debasis
    Chintha, Appa Rao
    Jayabalan, Bhagyaraj
    Bhattacharya, Basudev
    Ghosh, Chiradeep
    Singh, Vivek Kumar
    MATERIALS TODAY COMMUNICATIONS, 2022, 32