Visible light active Ce/Ce2O/CeO2/TiO2 nanotube arrays for efficient hydrogen production by photoelectrochemical water splitting

Highly-ordered TiO2 nanotube arrays (TNTs) were fabricated by Ti sheet by electrochemical anodization. Ce and its oxide could be loaded on TNTs as cocatalysts for water splitting electrode. SEM, XRD and XPS indicated that the Ce and its oxide were a mixture of Ce, Ce(2)O3 and CeO2 and dispersed upper and inner TNTs. The Ce/Ce(2)O3/CeO2/TiO2 nanotube arrays showed stronger photocurrent response, higher photoconversion efficiency (PCE) for hydrogen generation and lower flat band potential (Em) than TiO2 nanotube arrays. The photoelectrochemical cell (PEC) with anode and cathode separate compartments was implied for hydrogen generation. Photoelectrochemical hydrogen production from pure water was demonstrated without external voltage using Ce/Ce(2)O3/CeO2/TNTs semiconductor electrode. By adding ethylene glycol in anode electrolyte and at E = 0.7 V (vs. open circuit potential) bias voltage, the photocurrent density reached 11.2 mA cm(-2), PCE for 6.1% and the average hydrogen production rate for 5 mL cm(-2) under 450 W Xe lamp illumination. Moreover, a stable H-2 generation property was studied in the visible light region. Meanwhile, the respective modification mechanism of Ce/Ce(2)O3/CeO2 cocatalysts for improving hydrogen production rate of TNTs was discussed in detail. Copyright (C) 2016, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.