Formation and sintering of 75 mol% alumina 25 mol% zirconia (2-3.5 mol% yttria) composite powder prepared by the hydrazine method

被引：6
|
作者：
Goto, K
Hirota, K
Yamaguchi, O
Kume, H
Inamura, S
Miyamoto, H
机构：
[1] DOSHISHA UNIV,FAC ENGN,DEPT MOLEC SCI & TECHNOL,TANABE,KYOTO 61003,JAPAN
[2] OSAKA PREFECTURAL INST IND TECHNOL,OSAKA 550,JAPAN
来源：
JOURNAL OF MATERIALS SCIENCE | 1996年 / 31卷 / 01期
关键词：
D O I：
10.1007/BF00355146
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Al2O3/Y2O3-doped ZrO2 composite powders with 25 mol% ZrO2 have been prepared by the hydrazine method. As-prepared powders are the mixtures of AlO(OH) gel solid solutions and amorphous ZrO2. The formation process leading to alpha-Al2O3/t-ZrO2 composite powders is investigated. Hot isostatic pressing has been performed for 1 h at 1500 degrees C under 196 MPa. Dense ZrO2-toughened Al2O3 (ZTA) ceramics with homogeneous-dispersed ZrO2 particles show excellent mechanical properties. The toughening mechanism is discussed.
引用
收藏
页码：204 / 208
页数：5
相关论文
共 40 条
  • [21] MECHANICAL-PROPERTIES OF HOT ISOSTATICALLY PRESSED ZIRCONIA(2 MOL-PERCENT YTTRIA)-REINFORCED MOLYBDENUM DISILICIDE COMPOSITE
    YAMADA, T
    HIROTA, K
    YAMAGUCHI, O
    MATERIALS RESEARCH BULLETIN, 1995, 30 (07) : 851 - 857
  • [22] Formation and sintering of 8 mol % Y2O3-substituted La2Zr2O7 by the hydrazine method
    Ota, A
    Matsumura, Y
    Yoshinaka, M
    Hirota, K
    Yamaguchi, O
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1998, 17 (03) : 199 - 201
  • [23] Mechanical properties of 2.0-3.5 mol% Y2O3-stabilized zirconia polycrystals fabricated by the solid phase mixing and sintering method
    Ohnishi, Hiroshi
    Naka, Hironori
    Sekino, Tohru
    Ikuhara, Yuichi
    Niihara, Koichi
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2008, 116 (1360) : 1270 - 1277
  • [24] Electrical properties of thin-walled 8 mol% yttria-stabilized zirconia electrolyte tubes prepared by an improved slip casting method
    He, TM
    Lu, Z
    Pei, L
    Huang, XQ
    Liu, ZG
    Su, WH
    JOURNAL OF ALLOYS AND COMPOUNDS, 2002, 333 (1-2) : 231 - 236
  • [25] Hybrid microwave sintering of alumina and 3 mol% Y2O3-stabilized zirconia in a multimode cavity-Influence of the sintering cell
    Khalile, Nouhaila
    Petit, Clemence
    Meunier, Christophe
    Valdivieso, Francois
    CERAMICS INTERNATIONAL, 2022, 48 (13) : 18143 - 18150
  • [26] The sintering-temperature-related microstructure and phase assemblage of alumina-doped and alumina-silica-co-doped 3-mol%-yttria-stabilized tetragonal zirconia
    Samodurova, Anastasia
    Vengust, Damjan
    Kocjan, Andraz
    Kosmac, Tomaz
    SCRIPTA MATERIALIA, 2015, 105 : 50 - 53
  • [27] POWDER PREPARATION AND SINTERING BEHAVIOR OF ZRO2-20MOL-PERCENT-CEO2 SOLID-SOLUTIONS PREPARED BY VARIOUS METHODS
    MASCHIO, S
    TROVARELLI, A
    BRITISH CERAMIC TRANSACTIONS, 1995, 94 (05): : 191 - 195
  • [28] Two-Stage Master Sintering Curve Approach to Sintering Kinetics of Undoped and Al2O3-Doped 8 Mol% Yttria-Stabilized Cubic Zirconia
    Song, Xiaochao
    Lu, Jie
    Zhang, Tianshu
    Ma, Jan
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2011, 94 (04) : 1053 - 1059
  • [29] Microstructure and electrical properties of aluminum oxide-reinforced 3 mol% yttria-stabilized tetragonal zirconia polycrystals/TiSi2 composites by vacuum sintering
    Liu, Weikang
    Chen, Yucong
    Wu, Cong
    Tang, Liangying
    Yao, Zhenhua
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2025, 22 (01)
  • [30] Sintering kinetics at constant rates of heating: effect of GeO2 addition on the initial sintering stage of 3 mol% Y2O3-doped zirconia powder
    Koji Matsui
    Junichi Hojo
    Journal of Materials Science, 2008, 43 : 852 - 859
1234