Formation and sintering of 75 mol% alumina 25 mol% zirconia (2-3.5 mol% yttria) composite powder prepared by the hydrazine method

被引：6
|
作者：
Goto, K
Hirota, K
Yamaguchi, O
Kume, H
Inamura, S
Miyamoto, H
机构：
[1] DOSHISHA UNIV,FAC ENGN,DEPT MOLEC SCI & TECHNOL,TANABE,KYOTO 61003,JAPAN
[2] OSAKA PREFECTURAL INST IND TECHNOL,OSAKA 550,JAPAN
来源：
JOURNAL OF MATERIALS SCIENCE | 1996年 / 31卷 / 01期
关键词：
D O I：
10.1007/BF00355146
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Al2O3/Y2O3-doped ZrO2 composite powders with 25 mol% ZrO2 have been prepared by the hydrazine method. As-prepared powders are the mixtures of AlO(OH) gel solid solutions and amorphous ZrO2. The formation process leading to alpha-Al2O3/t-ZrO2 composite powders is investigated. Hot isostatic pressing has been performed for 1 h at 1500 degrees C under 196 MPa. Dense ZrO2-toughened Al2O3 (ZTA) ceramics with homogeneous-dispersed ZrO2 particles show excellent mechanical properties. The toughening mechanism is discussed.
引用
收藏
页码：204 / 208
页数：5
相关论文
共 40 条
  • [1] Formation of alumina/zirconia (3 mol% yttria) composite powders prepared by the hydrazine method
    Yamakata, Koji, 1600, American Ceramic Soc, Westerville, OH, United States (77):
  • [2] Formation and sintering of yttria-doped tetragonal zirconia with 50 mol% alumina prepared by the hydrazine method
    Kimoto, Shinya, 1694, American Ceramic Soc, Westerville, OH, United States (77):
  • [3] FORMATION OF ALUMINA-ZIRCONIA (3 MOL-PERCENT-YTTRIA) COMPOSITE POWDERS PREPARED BY THE HYDRAZINE METHOD
    YAMAKATA, K
    HIROTA, K
    YAMAGUCHI, O
    KUME, H
    INAMURA, S
    MIYAMOTO, H
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1994, 77 (08) : 2207 - 2208
  • [4] FORMATION AND SINTERING OF YTTRIA-DOPED TETRAGONAL ZIRCONIA WITH 50 MOL-PERCENT ALUMINA PREPARED BY THE HYDRAZINE METHOD
    KIMOTO, S
    HIROTA, K
    YAMAGUCHI, O
    KUME, H
    INAMURA, S
    MIYAMOTO, H
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1994, 77 (06) : 1694 - 1696
  • [5] Characteristics of 8 mol% yttria stabilized zirconia powder prepared by spray drying process
    Prabhakaran, K.
    Beigh, M. O.
    Lakra, J.
    Gokhale, N. M.
    Sharma, S. C.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 189 (1-3) : 178 - 181
  • [6] Effects of alumina as dopant on sintering and grain growth behavior of 9 mol% yttria-stabilized zirconia
    Liu, Tao
    Li, Lin
    Yu, Jing-Kun
    Xu, Ji-Lin
    Dongbei Daxue Xuebao/Journal of Northeastern University, 2010, 31 (08): : 1137 - 1140
  • [7] Properties of 2 mol% Yttria Stabilized Zirconia-Alumina-Cerium Hexaaluminate Composites
    Kern, Frank
    CERAMICS-SWITZERLAND, 2020, 3 (02): : 190 - 198
  • [8] Hybrid microwave sintering of Zirconia Toughened Alumina in a multimode cavity - Influence of the content of 3 mol% yttria stabilized zirconia and sintering configurations
    Khalile, Nouhaila
    Petit, Clemence
    Meunier, Christophe
    Valdivieso, Francois
    OPEN CERAMICS, 2023, 14
  • [9] Effect of alumina additions on mechanical and electrical properties of 8mol% yttria-stabilized zirconia prepared by spark pplasma sintering
    Kim, Jae Kwang
    Kim, Kyung Hun
    Choa, Yong Ho
    Yoon, Jong-Won
    Shim, Kwang Bo
    SCIENCE OF ENGINEERING CERAMICS III, 2006, 317-318 : 917 - 920
  • [10] Analysis of the sintering process of 2 mol % yttria-doped zirconia by positron annihilation lifetime measurements
    Yagi, Y
    Hirano, S
    Ujihira, Y
    Miyayama, M
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1999, 18 (03) : 205 - 207
1234