FINITE ELEMENT ANALYSIS OF THE GEOMETRY OF THE TOOLS USED FOR THE CUP DRAWING PROCESS

被引：0
|
作者：
Iordache, Monica [1 ]
机构：
[1] Univ Pitesti Romania, Dept Technol & Management, Pitesti, Romania
来源：
PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE MODERN TECHNOLOGIES, QUALITY AND INNOVATION: MODTECH 2009 - NEW FACE OF TMCR | 2009年
关键词：
cup drawing; anisotropic sheet steel; geometry of the tools; simulation MEF; Abaqus; METAL SHEETS;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The plastic strain procedure which is largely used in industry is the deep drawing process of sheet steel. Achieving a flawless cupped piece depends mainly on three factors: the characteristics of the sheet steel, the shape of the tools (the radius of the die and of the punch) and the cupping conditions. The simulation of the cupping process by taking into account the three factors which influence it allows one to know even from the designing phase whether a piece with a given configuration can be obtained through the cupping process or not. In this study we present the influence of the geometry of the die on some parameters of the cup drawing process of the anisotropic sheet steel. The results are obtained through the MEF simulation of the cup drawing process with the help of the ABAQUS programme.
引用
收藏
页码：339 / 342
页数：4
相关论文
共 50 条
  • [21] Finite element analysis and geometry optimization of a flywheel used in a monorail conveyor
    Stanasel, I.
    Blaga, F.
    Buidos, T.
    Craciun, D.
    MODTECH INTERNATIONAL CONFERENCE - MODERN TECHNOLOGIES IN INDUSTRIAL ENGINEERING VI (MODTECH 2018), 2018, 400
  • [22] Finite element analysis of the warm deep drawing process of magnesium alloys
    Palumbo, G
    Zhang, SH
    Pinto, S
    Tricarico, L
    Xu, YC
    Zhang, K
    MATERIALS PROCESSING AND DESIGN: MODELING, SIMULATION AND APPLICATIONS, PTS 1 AND 2, 2004, 712 : 814 - 819
  • [23] STOCHASTIC ANALYSIS OF A DEEP DRAWING PROCESS USING FINITE ELEMENT SIMULATIONS
    Padmanabhan, R.
    Oliveira, M. C.
    Alves, J. L.
    Menezes, L. F.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2009, 2 : 347 - 350
  • [24] Finite element analysis of chip breaker geometry in turning process
    Chen, Dyi-Cheng
    You, Ci-Syong
    Kao, Shih-Hung
    ADVANCES IN MECHANICAL ENGINEERING, 2016, 8 (07) : 1 - 10
  • [25] Tool design in a multi-stage drawing and ironing process of a rectangular cup with a large aspect ratio using finite element analysis
    Kim, SH
    Kim, SH
    Huh, H
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2002, 42 (07): : 863 - 875
  • [26] Finite element Simulation of the warm deep drawing process in forming a circular cup from magnesium alloy sheet
    Soltani, B. (bsoltani@kashanu.ac.ir), 1600, Sharif University of Technology (20):
  • [27] Finite element simulation of the warm deep drawing process in forming a circular cup from magnesium alloy sheet
    Ossia, S. A.
    Soltani, B.
    SCIENTIA IRANICA, 2013, 20 (04) : 1213 - 1220
  • [28] Finite element analysis of deep drawing
    Chen, Dyi-Cheng
    Li Cheng-Yu
    Lai, Yu-Yu
    ADVANCES IN MECHANICAL ENGINEERING, 2019, 11 (09)
  • [29] Finite Element Analysis of Square Cup Deep Drawing of Pure Titanium Metal Sheet at Elevated Temperatures
    Yang, Tung-Sheng
    ADVANCED DESIGN AND MANUFACTURE TO GAIN A COMPETITIVE EDGE: NEW MANUFACTURING TECHNIQUES AND THEIR ROLE IN IMPROVING ENTERPRISE PERFORMANCE, 2008, : 33 - 42
  • [30] Analysis of the influence of back-pull in drawing process by the finite element method
    Camacho, AM
    Domingo, R
    Rubio, E
    González, C
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 164 : 1167 - 1174
12345