TECHNOLOGY AND EQUIPMENT FOR ION CHEMICAL-HEAT TREATMENT OF AGRICULTURAL MACHINERY PARTS

被引：0

作者：

Bosyakov, Mihail ^{[1
]}

Bondarenko, Sergej ^{[1
]}

Bondarenko, Aleksandr ^{[1
]}

Maiseyenka, Anton ^{[1
]}

机构：

[1] Natl Acad Sci Belarus, Phys & Technol Inst, Minsk, BELARUS

来源：

17TH INTERNATIONAL SCIENTIFIC CONFERENCE: ENGINEERING FOR RURAL DEVELOPMENT | 2018年

关键词：

plasma nitriding; current density; flux molecular ions of N2+;

D O I：

10.22616/ERDev2018.17.N115

中图分类号：

S2 [农业工程];

学科分类号：

0828 ;

摘要：

The paper describes a method for controlling the process of ion nitriding on industrial equipment based on the formation of a flux of molecular nitrogen ions in a glow discharge, the value of which is consistent with the absorptive capacity of steel, depending on its chemical composition and nitriding temperature. This method was developed at the Physical-Technical Institute NAS of Belarus and is successfully used by the largest machine-building enterprises of Belarus, in particular, OJSC "GOMSELMASH", for processing a wide range of parts from 16MnCrS5, 42CMo4, 41CrA1Mo7 and others. Using this method of organization and the process of ion nitriding allows to obtain reproducible results of processing, regardless of the degree of loading of the camera with parts.

引用

页码：1329 / 1335

页数：7

共 50 条

[41] Experience in chemical heat treatment of parts made of powder materials for VAZ passenger cars
Koftelev, VT
Rudenko, EN
METAL SCIENCE AND HEAT TREATMENT, 1996, 38 (9-10) : 431 - 434
[42] FULL HEAT-TREATMENT OF CHEMICAL AND PETROCHEMICAL OUT-OF-SIZE PROCESS EQUIPMENT
PAVEL, A
POPESCU, V
MARCULESCU, C
OLTEANU, I
REVISTA DE CHIMIE, 1977, 28 (04): : 353 - 356
[43] DESIGNING HEAT-EXCHANGE EQUIPMENT USING A COMPUTER-AIDED DESIGN SYSTEM FOR HEAT EXCHANGERS AND CHEMICAL WATER-TREATMENT EQUIPMENT.
Menyakin, V.V.
Shpungin, V.N.
Soviet energy technology, 1987, (07): : 22 - 24
[44] HIGHER FUNCTIONAL RELIABILITY FOR PARTS MADE OF TITANIUM-ALLOYS BY A CHEMICAL HEAT-TREATMENT
LAZAREV, GE
SOVIET ENGINEERING RESEARCH, 1982, 2 (06): : 37 - 37
[45] Effect of chemical and heat treatment on 3D printed parts: nanoparticles embedment approach
Francis, Vishal
Garg, Sahil
Saxena, Kuldeep Kumar
Jain, Prashant K.
Lade, Jayahari
Kumar, Deepak
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2022, 8 : 2277 - 2288
[46] The Implementation of Microstructural and Heat Treatment Models to Development of Forming Technology of Critical Aluminum-Alloy Parts
Biba, Nikolay
Alimov, Artem
Shitikov, Andrey
Stebunov, Sergei
PROCEEDINGS OF 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2018), 2018, 1960
[47] Application and Development of Chemical Heat Washing Technology in Petroleum Oily Sludge Treatment: A Review
Liu, Huapeng
Wang, Xiyuan
Zhai, Youqian
Xu, Tingting
SEPARATIONS, 2024, 11 (01)
[48] Formation of Gas Turbine Engine Parts from Heat-Resistant Alloys by the Pressure Method with Torsion under Isothermal Conditions (Technology and Equipment)
Burlakov, I. A.
Utyashev, F. Z.
Ibragimov, A. R.
Sukhorukov, R. Yu.
Gavrilina, L. V.
JOURNAL OF MACHINERY MANUFACTURE AND RELIABILITY, 2024, 53 (07) : 776 - 782
[49] Technology of cold press forging and chemical heat treatment of inner hinge case for VAZ automobile
Metalloved Term Obrab Met, 11 (18-20):
[50] Theory and technology of sintering processes, heat treatment and chemical heat treatment - Sintering a disperse mixture of W-Sc2O3 powders
Getman, OI
Panichkina, VV
Skorokhod, VV
POWDER METALLURGY AND METAL CERAMICS, 1995, 34 (11-12) : 595 - 599

← 1 2 3 4 5 →