Reactive flow modeling of the polymer bonded explosive LX-17 double shock experiments

被引:5
|
作者
Rehagen, Thomas J. [1 ]
Vitello, Peter [1 ]
Bastea, Sorin [1 ]
Fried, Laurence E. [1 ]
机构
[1] Lawrence Livermore Natl Lab, 7000 East Ave, Livermore, CA 94550 USA
关键词
DETONATION; TRIAMINOTRINITROBENZENE; PRESSURE; PRODUCTS; EQUATION; WAVES; STATE;
D O I
10.1063/1.5029740
中图分类号
O59 [应用物理学];
学科分类号
摘要
Overdriven double shock experiments provide a measurement of the properties of the reaction product states of the 1-3-5-triamino-2-4-6trinitrobenzene-based explosive LX-17. These experiments used two flyer materials mounted on the end of a projectile to send an initial shock through the LX-17, followed by a second shock of a higher magnitude into the detonation products. Here, the experimental results are compared to 2D reactive flow modeling. A reactive flow model that describes only the kinetics of the LX-17 decomposition fails to accurately reproduce the decay of the first shock or the curvature or strength of the second shock. A new model is proposed in which the carbon condensate produced in the reaction zone is controlled by a kinetic rate. This allows the carbon condensate to be initially out of chemical equilibrium with the product gas. This new model reproduces the initial detonation peak and decay and matches the curvature of the second shock; however, it still over-predicts the strength of the second shock.
引用
收藏
页数:8
相关论文
共 50 条
  • [31] SHOCK INITIATION EXPERIMENTS PLUS IGNITION AND GROWTH MODELING OF DAMAGED LX-04 CHARGES
    Chidester, Steven K.
    Garcia, Frank
    Vandersall, Kevin S.
    Tarver, Craig M.
    SHOCK COMPRESSION OF CONDENSED MATTER - 2009, PTS 1 AND 2, 2009, 1195 : 271 - 274
  • [32] Ignition and Growth Reactive Flow Modeling for RDX Based High Explosive
    Chen Qingchou
    Jiang Xiaohua
    Zhu Mingshui
    Li Min
    THEORY AND PRACTICE OF ENERGETIC MATERIALS (VOL IX), PROCEEDINGS OF THE 2011 INTERNATIONAL AUTUMN SEMINAR ON PROPELLANTS, EXPLOSIVES AND PYROTECHNICS, 2011, : 604 - 608
  • [33] Numerical modeling of crack growth in polymer-bonded explosive with cavity subject to compression
    Chen, Xinfa
    Liu, Jiejian
    Huang, Xicheng
    Suo, Tao
    Li, Yulong
    ADVANCES IN MECHANICAL ENGINEERING, 2019, 11 (06)
  • [34] A Study of Shock Initiation Experiments for the Explosive PBX 9502 Using Three Reactive Burn Models
    Price, Matthew A.
    SHOCK COMPRESSION OF CONDENSED MATTER - 2019, 2020, 2272
  • [35] Shock Initiation Experiments with Modeling on a DNAN Based Melt-Cast Insensitive Explosive
    Feichao Miao
    Dandan Li
    Yangfan Cheng
    Junjiong Meng
    Lin Zhou
    Defence Technology, 2024, (02) : 655 - 662
  • [36] Shock Initiation Experiments with Modeling on a DNAN Based Melt-Cast Insensitive Explosive
    Miao, Feichao
    Li, Dandan
    Cheng, Yangfan
    Meng, Junjiong
    Zhou, Lin
    DEFENCE TECHNOLOGY, 2024, 32 : 655 - 662
  • [37] Numerical modeling of reactive polymer flow in porous media
    Liu, HG
    Thompson, KE
    COMPUTERS & CHEMICAL ENGINEERING, 2002, 26 (11) : 1595 - 1610
  • [38] Dynamic Mechanical Damage and Non-Shock initiation of a New Polymer Bonded Explosive during Penetration
    Li, Xiao
    Liu, Yizhi
    Sun, Yi
    POLYMERS, 2020, 12 (06)
  • [39] Shock initiation experiments on PBX9501 explosive at 150○c for ignition and growth modeling
    Vandersall, Kevin S.
    Tarver, Craig M.
    Garcia, Frank
    Urtiew, Paul A.
    SHOCK COMPRESSION OF CONDENSED MATTER - 2005, PTS 1 AND 2, 2006, 845 : 1127 - 1130
  • [40] Short-duration pulse shock initiation characteristics of a TATB/HMX-based polymer bonded explosive
    Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang 621900, China
    不详
    Baozha Yu Chongji, 2007, 3 (230-235):