A Brief Review of White Layer Formation in Hard Machining with a Case Study

被引：3

作者：

Rajbongshi, Sanjib Kr ^{[1
]}

Sarma, D. K. ^{[1
]}

Singh, Meinam Annebushan ^{[1
]}

机构：

[1] NIT Meghalaya, Shillong 793003, Meghalaya, India

来源：

ADVANCES IN MECHANICAL ENGINEERING, ICRIDME 2018 | 2020年

关键词：

Hard turning; White layer thickness; Micro-hardness;

D O I：

10.1007/978-981-15-0124-1_36

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

White layer formation is a phenomenon which is found to occur during hard machining. White layer is brittle and can cause crack in the machined surfaces. It affects fatigue strength and service life of the machined components. To obtain a product with proper strength and toughness, white layer elimination is a necessary condition. In the present work, a thorough literature review about the formation of white layer, its effect and the remedial procedures how to prevent it is presented. Based on the literature, a case study is also presented in the present work to study the influence of cutting parameters on white layer formation with respect to the corresponding micro-hardness. The experimental study confirmed that, cutting speed and flank wear has direct influence on white layer thickness (WLT) and micro-hardness.

引用

页码：407 / 417

页数：11

共 50 条

[41] A review on Laser Machining of hard to cut materials
Nagimova, Aigul
Perveen, Asma
MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 2440 - 2447
[42] An experimental study of laser-assisted machining of hard-to-wear white cast iron
Masood, S. H.
Armitage, Kelly
Brandt, Milan
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2011, 51 (06): : 450 - 456
[43] A Review of Burr Formation in Machining
Dornfeld, D.
Min, S.
BURRS - ANALYSIS, CONTROL AND REMOVAL: PROCEEDINGS OF THE CIRP INTERNATIONAL CONFERENCE ON BURRS, 2009, 2010, : 3 - 11
[44] Formation of white layers in steels by machining and their characteristics
S. Akcan
WI. S. Shah
S. P. Moylan
S. Chandrasekar
P. N. Chhabra
H. T. Y. Yang
Metallurgical and Materials Transactions A, 2002, 33 : 1245 - 1254
[45] Formation of white layers in steels by machining and their characteristics
Akcan, S
Shah, S
Moylan, SP
Chhabra, PN
Chandrasekar, S
Yang, HTY
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2002, 33 (04): : 1245 - 1254
[46] Study on the White Layer of Hard Turned GCr15 Bearing Steel
Wen, D. H.
Liu, X. L.
Hong, T.
ULTRA-PRECISION MACHINING TECHNOLOGIES, 2009, 69-70 : 20 - +
[47] Tool wear effects on white and dark layer formation in hard turning of AISI 52100 steel
Attanasio, A.
Umbrello, D.
Cappellini, C.
Rotella, G.
M'Saoubi, R.
WEAR, 2012, 286 : 98 - 107
[48] An experimental investigation of work material microstructure effects on white layer formation in PCBN hard turning
Poulachon, G
Albert, A
Schluraff, M
Jawahir, IS
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2005, 45 (02): : 211 - 218
[49] A descriptive phenomenological model for white layer formation in hard turning of AISI 52100 bearing steel
Hosseini, S. B.
Klement, U.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2021, 32 : 299 - 310
[50] Modeling of White Layer Formation in Electric Discharge Machining (EDM) by Incorporating Massive Random Discharge Characteristics
Liu, J. F.
Guo, Y. B.
18TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM XVIII), 2016, 42 : 697 - 702

← 1 2 3 4 5 →