NUMERICAL AND EXPERIMENTAL MODAL ANALYSIS OF A CARBON FIBRE MONOCOQUE

被引：1
|
作者：
Skovajsa, Michal [1 ]
Kroft, Roman [1 ]
Sedlacek, Frantisek [1 ]
机构：
[1] Univ West Bohemia, Fac Mech Engn, Univ 8, Plzen 30100, Czech Republic
来源：
MM SCIENCE JOURNAL | 2021年 / 2021卷
关键词：
Modal analysis; Carbon fibre; Monocoque; Experimental measurement;
D O I：
10.17973/MMSJ.2021_6_2021048
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This paper deals with the comparison of experimental measurements and numerical simulation of the natural frequency and natural shape of a carbon fibre monocoque. This comparison is used to validate the numerical analysis with a real monocoque. Usually, monocoques consist of orthotropic materials like carbon fibre sandwich with a honeycomb core. The monocoque is manufactured by hand from several layers of different materials, which are connected by glued joints. This does not guarantee the material properties or the same mass the idealized numerical simulation.
引用
收藏
页码：4371 / 4375
页数：5
相关论文
共 50 条
  • [31] Fibre mapping analysis in composite forming: experimental and numerical comparison
    Colmars, J.
    Rusanov, A.
    Ta, A. T.
    Naouar, N.
    Boisse, P.
    PROCEEDINGS OF THE 19TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2016), 2016, 1769
  • [32] Design, Analysis, and Simulation of an Automotive Carbon Fiber Monocoque Chassis
    Wu, Jingsi
    Badu, Owusu Agyeman
    Tai, Yonchen
    George, Albert R.
    SAE INTERNATIONAL JOURNAL OF PASSENGER CARS-MECHANICAL SYSTEMS, 2014, 7 (02): : 838 - 861
  • [33] Modal analysis based on finite element method and experimental validation on carbon fibre composite drive shaft considering steel joints
    Ding, G.
    Xie, C.
    Zhang, J.
    Zhang, G.
    Song, C.
    Zhou, Z.
    MATERIALS RESEARCH INNOVATIONS, 2015, 19 : 748 - 753
  • [34] An experimental and numerical study of industrially representative wrinkles in carbon fibre composite laminates
    Pilato, Nicholas R.
    Butler, Richard
    Trevarthen, James
    Lunt, Alexander J. G.
    MATERIALS & DESIGN, 2022, 222
  • [35] Experimental and numerical studies on the sensitivity of carbon fibre/silicone rubber composite sensors
    Yang, Lili
    Ge, Yong
    Zhu, Qinghua
    Zhang, Ce
    Wang, Zongpeng
    Liu, Penghuan
    SMART MATERIALS AND STRUCTURES, 2012, 21 (03)
  • [36] Experimental and Numerical Nonlinear Modal Analysis of a Beam with Impact: Part I - Numerical Investigation
    Schreyer, F.
    Peter, S.
    Leine, R., I
    NONLINEAR DYNAMICS, VOL 1, 2019, : 179 - 182
  • [37] Experimental and Numerical Nonlinear Modal Analysis of a Beam with Impact: Part II - Experimental Investigation
    Peter, S.
    Schreyer, F.
    Leine, R., I
    NONLINEAR DYNAMICS, VOL 1, 2019, : 183 - 185
  • [38] Experimental and numerical study of the additively manufactured carbon fibre reinforced polymers including fibre Bragg grating sensors
    Shafighfard, Torkan
    Mieloszyk, Magdalena
    COMPOSITE STRUCTURES, 2022, 299
  • [39] Ultrasonic Modal Detection in Carbon Fibre Plates using Fibre Optic Sensors
    Thursby, Graham
    Culshaw, Brian
    FOURTH EUROPEAN WORKSHOP ON OPTICAL FIBRE SENSORS, 2010, 7653
  • [40] Damage Detection of Fibre-Reinforced Composite Structures Using Experimental Modal Analysis
    Geweth, Christian A.
    Khosroshahi, Ferina Saati
    Sepahvand, Kheirollah
    Kerkeling, Christoph
    Marburg, Steffen
    X INTERNATIONAL CONFERENCE ON STRUCTURAL DYNAMICS (EURODYN 2017), 2017, 199 : 1900 - 1905
12345