Interface characteristics in diffusion bonding of a γ-TiAl alloy to Ti-6Al-4V

被引：14
|
作者：
Wang, XiuFeng
Ma, Mo
Liu, XueBin
Lin, JianGuo [1 ]
机构：
[1] Xiangtan Univ, Key Lab Low Dimens Mat & Applicat Technol, Xiangtan 411105, Hunan, Peoples R China
[2] Xiangtan Univ, Fac Mat & Photoelect Phys, Xiangtan 411105, Hunan, Peoples R China
来源：
JOURNAL OF MATERIALS SCIENCE | 2007年 / 42卷 / 11期
基金：
中国国家自然科学基金;
关键词：
D O I：
10.1007/s10853-006-0189-2
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the present study, diffusion bonding of a gamma-TiAl alloy to a Ti-6Al-4V alloy at the different temperatures ranging from 1073 to 1173 K under an applied stress of 100 MPa for 2 h was investigated. The observation of the microstructure revealed that sound joints between the gamma-TiAl Alloy and the Ti-alloy without any pores or cracks could be achieved through diffusion bonding at temperatures over 1073 K under the applied stress of 100 MPa for 2 h. The bond was composed of two zones, and its width increases with the increase of the bonding temperature. The EDS chemical composition profiles indicated that there is a diffusion flux of Al-atoms from gamma-TiAl alloy towards the Ti-alloy and of Ti-atoms in the opposite direction. The microhardness of the diffusion bond was in the range of 310-450 HV, and increased monotonously from the side near the gamma-TiAl alloy to the side near the Ti-alloy. In this bonding process, the diffusion flux of Ti atoms in interface is mainly controlled by grain boundary diffusion.
引用
收藏
页码：4004 / 4008
页数：5
相关论文
共 50 条
  • [1] Interface characteristics in diffusion bonding of a γ-TiAl alloy to Ti–6Al–4V
    Xiu Feng Wang
    Mo Ma
    Xue Bin Liu
    Jian Guo Lin
    Journal of Materials Science, 2007, 42 : 4004 - 4008
  • [2] Superplastic characteristics and diffusion bonding of Ti-6Al-4V alloy
    Lee, Ho-Sung
    Yoon, Jong-Hoon
    Yi, Yeong-Moo
    Shin, Dong Hyuk
    MECHANICAL BEHAVIOR OF MATERIALS X, PTS 1AND 2, 2007, 345-346 : 549 - +
  • [3] Diffusion bonding of γ-TiAl alloy to Ti-6Al-4V alloy under hot pressure
    王秀锋
    马蓦
    刘学斌
    吴学庆
    檀朝桂
    石荣凯
    林建国
    Transactions of Nonferrous Metals Society of China, 2006, (05) : 1059 - 1063
  • [4] Diffusion bonding of TiAl based alloy to Ti-6Al-4V alloy using amorphous interlayer
    Xue, Z.
    Yang, Q.
    Gu, L.
    Hao, X.
    Ren, Y.
    Geng, Y.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2015, 46 (01) : 40 - 46
  • [5] DIFFUSION BONDING OF Ti-6AL-4V ALLOY WITH AN INTERLAYER OF Al.
    Koono, Akiomi
    Yamamoto, Akihiko
    Yamada, Toshihiro
    Takeda, Tadashi
    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 1985, 3 (01): : 145 - 151
  • [6] An investigation of Ti-43Al-9V/Ti-6Al-4V interface by diffusion bonding
    Wang, X. R.
    Yang, Y. Q.
    Luo, X.
    Zhang, W.
    Zhao, G. M.
    Huang, B.
    INTERMETALLICS, 2013, 36 : 127 - 132
  • [7] Diffusion bonding of TiC or TiB reinforced Ti-6Al-4V matrix composites to conventional Ti-6Al-4V alloy
    Prikhodko, Sergey, V
    Savvakin, Dmytro G.
    Markovsky, Pavlo E.
    Stasuk, Olexander O.
    Penney, James
    Shirzadi, Amir A.
    Davies, Peter D.
    Davies, Helen M.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2020, 25 (06) : 518 - 524
  • [8] DIFFUSION BONDING OF SIC/TI-6AL-4V COMPOSITE TO TI-6AL-4V ALLOY AND FRACTURE-BEHAVIOR OF JOINT
    FUKUMOTO, S
    HIROSE, A
    KOBAYASHI, KF
    MATERIALS SCIENCE AND TECHNOLOGY, 1993, 9 (06) : 520 - 527
  • [9] DIFFUSION BONDING OF SIC FIBER REINFORCED TI-6AL-4V ALLOY
    HIROSE, A
    KOTOH, M
    FUKUMOTO, S
    KOBAYASHI, KF
    MATERIALS SCIENCE AND TECHNOLOGY, 1992, 8 (09) : 811 - 815
  • [10] DIFFUSION BONDING BEHAVIOR OF TI-6AL-4V
    WALSH, DW
    BALAGUER, JP
    CIM BULLETIN, 1986, 79 (890): : 94 - 94
12345