Optimizing the Welding Parameters of Reinforcing Steel Bars

被引：14

作者：

Moustafa, Tamer ^{[1
]}

Khalifa, Waleed ^{[2
]}

El-Koussy, M. Raafat ^{[2
]}

Abd El-Reheem, Nahed ^{[2
]}

机构：

[1] Ezz Flat Steel, Ain Sukhna, Suez, Egypt

[2] Cairo Univ, Dept Met Engn, Giza 12613, Egypt

来源：

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING | 2016年 / 41卷 / 05期

关键词：

Rebar; Welding; Microstructure; Tensile; HAZ structure; Lap weld length; Butt; WELDED SPLICES; CORROSION; BEHAVIOR;

D O I：

10.1007/s13369-015-1929-x

中图分类号：

O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];

学科分类号：

07 ; 0710 ; 09 ;

摘要：

Welding is highly recommended for splicing concrete reinforcing bars in all concrete structures. SMAW lap-welded and butt-welded joints made from Tempcore and hot-rolled reinforcing steel bars were studied. The results give an insight into the effect of metallurgical structure and the chemical composition on the effective lap weld length of reinforcing steel bars. It was found that the hot-rolled bars gave shorter acceptable lap length than the Tempcore bars. This was because of the higher amount of pearlite/bainite phases in weld area. In the other hand, the HAZ hardening resulted in the most pronounced changes in ductility of hot-rolled joints. Preheating the hot-rolled bars up to 200 degrees C was insufficient to prevent the formation of HAZ hard phases.

引用

页码：1699 / 1711

页数：13

共 50 条

[21] Dynamic behaviour of reinforcing steel bars in tension
Cadoni, Ezio
Dotta, Matteo
Forni, Daniele
Tesio, Nicoletta
PERFORMANCE, PROTECTION AND STRENGTHENING OF STRUCTURES UNDER EXTREME LOADING, 2011, 82 : 86 - 91
[22] Underwater adhesion of polymethyl methacrylate concretes to reinforcing steel (reinforcing bars)
Bhutta, MAR
Ohama, Y
Demura, K
ACI MATERIALS JOURNAL, 1999, 96 (01) : 90 - 94
[23] REINFORCING STEEL MEMBERS AND THE EFFECTS OF WELDING
TIDE, RHR
ENGINEERING JOURNAL-AMERICAN INSTITUTE OF STEEL CONSTRUCTION INC, 1990, 27 (04): : 129 - 131
[24] Reinforcing steel members and the effects of welding
Tide, R.H.R., 1600, (27):
[25] Fillet welding of skewed reinforcing steel to steel plate
Pratt, Erin D.
PCI JOURNAL, 2023, 68 (01): : 48 - 59
[26] Optimizing resistance spot welding parameters for vibration damping steel sheets
Cent de Recherches et Developpements, Metallurgiques, Sollac, France
Welding Journal (Miami, Fla), 1998, 77 (01):
[27] Optimizing resistance spot welding parameters for vibration damping steel sheets
Oberle, H
Commaret, C
Magnaud, R
Minier, C
Pradere, G
WELDING JOURNAL, 1998, 77 (01) : 8S - 13S
[28] Optimised projection welding of steel Bars
Mikno, Zygmunt
Pikula, Janusz
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2024, 24 (03)
[29] Preliminary Research on Influence of Welding Parameters Strength at Welded Joints in Ribbed Reinforcing Steel
Bilic, Zeljko
Samardzic, Ivan
Misina, Nedjeljko
Stoic, Katarina
TEHNICKI GLASNIK-TECHNICAL JOURNAL, 2020, 14 (03): : 369 - 374
[30] Versatile hysteretic model of reinforcing steel bars with buckling
Massone, Leonardo M.
Rosa, Jose
Mesa, Alvaro
STRUCTURES, 2023, 47 : 1858 - 1868

← 1 2 3 4 5 →