Exergoeconomic analysis of a PEM fuel cell at various operating conditions

被引:51
|
作者
Kazim, A [1 ]
机构
[1] United Arab Emirates Univ, Dept Mech Engn, Al Ain, U Arab Emirates
关键词
PEM fuel cell; exergetic efficiency; exergy costing; exergoeconomics;
D O I
10.1016/j.enconman.2004.06.036
中图分类号
O414.1 [热力学];
学科分类号
摘要
In this paper, a comprehensive exergoeconomic analysis of a 10 kW PEM fuel cell at various operating temperatures, pressures, cell voltages and air stoichiometries is performed. The analysis is performed at fuel cell operating temperatures (T/T-0) and pressures (P/P-0) ranging from 1 to 1.25 and 1 to 3, respectively. In addition, the calculations are performed on typical fuel cell operating voltages of 0.5 V and 0.6 V and at air stoichiometries of 2, 3 and 4 in order to determine their effects on the exergy cost of the fuel cell. The calculated results demonstrated the significance of the operating pressure, cell voltage and air stoichiometry on the exergy cost of the fuel cell. Furthermore, lower capital cost of the fuel cell. annual O & M cost and hydrogen cost could contribute to a drastic reduction in the exergy cost. Thus. a substantial improvement in the overall results could be achieved. (C) 2004 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1073 / 1081
页数:9
相关论文
共 50 条
  • [41] The influence of a novel bio-cell flow field pattern on the performance and operating conditions for a PEM fuel cell
    Weng, Fang-Bor
    Su, Ay
    Lo, Kai-Fan
    Tu, Cheng-Hsin
    Proceedings of the 3rd International Conference on Fuel Cell Science, Engineering, and Technology, 2005, : 175 - 181
  • [42] Analysis of the operating pressure and GDL geometrical configuration effect on PEM fuel cell performance
    Ahmadi, Nima
    Dadvand, Abdolrahman
    Rezazadeh, Sajad
    Mirzaee, Iraj
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2016, 38 (08) : 2311 - 2325
  • [43] Influence of Variations of Operating Parameters on the Functioning of a PEM Electrolyzer and PEM Fuel Cell Systems
    Beainy, A.
    Moubayed, N.
    2016 THIRD INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONICS, COMPUTER ENGINEERING AND THEIR APPLICATIONS (EECEA), 2016, : 63 - 70
  • [44] Analysis of the operating pressure and GDL geometrical configuration effect on PEM fuel cell performance
    Nima Ahmadi
    Abdolrahman Dadvand
    Sajad Rezazadeh
    Iraj Mirzaee
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2016, 38 : 2311 - 2325
  • [45] Impedance characteristics of the direct methanol fuel cell under various operating conditions
    Seo, Sang Hem
    Lee, Chang Sik
    ENERGY & FUELS, 2008, 22 (02) : 1204 - 1211
  • [46] Simulation Model of PEM Fuel Cell Operating at Hydrogen and Oxygen
    Garus, Jerzy
    Polak, Adam
    MECHATRONICS: IDEAS FOR INDUSTRIAL APPLICATIONS, 2015, 317 : 31 - 39
  • [47] Optimal operating points of PEM fuel cell model with RSM
    Xuan, Dongji
    Li, Zhenzhe
    Kim, Jinwan
    Kim, Youngbae
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2009, 23 (03) : 717 - 728
  • [48] Optimal operating points of PEM fuel cell model with RSM
    Dongji Xuan
    Zhenzhe Li
    Jinwan Kim
    Youngbae Kim
    Journal of Mechanical Science and Technology, 2009, 23 : 717 - 728
  • [49] Quantitative analysis and co-optimization of cathode catalyst layer compositions and operating conditions on cost and performance of PEM fuel cell
    Lin, Xiongping
    Dai, Ruoyu
    Xu, Yiming
    Zheng, Jieqing
    INTERNATIONAL JOURNAL OF GREEN ENERGY, 2024, 21 (03) : 651 - 665
  • [50] Effect of operating conditions on current density distribution and high frequency resistance in a segmented PEM fuel cell
    Gerteisen, Dietmar
    Zamel, Nada
    Sadeler, Christian
    Geiger, Florian
    Ludwig, Victor
    Hebling, Christopher
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2012, 37 (09) : 7736 - 7744