SEISMIC PERFORMANCE OF DUAL STEEL FRAMES WITH DISSIPATIVE METAL SHEAR PANELS

被引：0
|
作者：
De Matteis, Gianfranco [1 ]
Brando, Giuseppe [2 ]
Caldoso, Federica [3 ]
D'Agostino, Federica [2 ]
机构：
[1] Univ Campania, Dept Architecture & Ind Design, Aversa, Ce, Italy
[2] Univ G dAnnunzio, Dept Engn & Geol, Pescara, Pe, Italy
[3] Ruredil, Milan, Italy
来源：
INGEGNERIA SISMICA | 2018年 / 35卷 / 02期
关键词：
Supplemental Damping; Incremental Dynamic Analyses (IDAs); Metal Shear Panels; Behaviour Factor; Metal Hysteretic Devices; REINFORCED-CONCRETE; EXPERIMENTAL TESTS; DESIGN; BUILDINGS; DEVICES;
D O I：
暂无
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
This paper deals with seismic response of dual steel frames with dissipative metal shear panels. The main goal is to provide design indications accounting for the main behavioural aspects of metal shear panels. To this purpose, numerical Incremental Dynamic Analyses (IDAs) using historical records have been carried out on two different steel frames, which have been properly designed in order to comply with specific design criteria. The outcomes highlight that metal shear panels allow a significant increment of collapse peak ground accelerations as well as a general reduction of both permanent and transient story drifts. The paper concludes with the evaluation of the equivalent q-behaviour factors to be used for simplified analysis. As it could be expected, a significant increment (up to 150%) have been determined in case of structures endowed with metal shear panels.
引用
收藏
页码：124 / 141
页数：35
相关论文
共 50 条
  • [21] Seismic resistant composite steel frames with dissipative devices
    Castiglioni, C. A.
    Kanyilmaz, A.
    Drei, A.
    Calado, L.
    Espihna, M.
    Goncalves, R. M.
    Rauert, T.
    Vayas, I.
    STESSA 2012: PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON BEHAVIOUR OF STEEL STRUCTURES IN SEISMIC AREAS, 2012, : 785 - 789
  • [22] Seismic retrofitting of moment resisting frames using low yield steel panels as shear walls
    De Matteis, G
    Mistakidis, ES
    STESSA 2003: BEHAVIOUR OF STEEL STRUCTURES IN SEISMIC AREAS, 2003, : 677 - 682
  • [23] Dissipative knee bracing for seismic strengthening of steel frames
    Valente, Marco
    BUILDING MATERIALS AND STRUCTURAL ENGINEERING II, 2013, 743 : 123 - 127
  • [24] Seismic rehabilitation of RC frames by using steel panels
    Mowrtage, Waiel
    2008 SEISMIC ENGINEERING CONFERENCE COMMEMORATING THE 1908 MESSINA AND REGGIO CALABRIA EARTHQUAKE, PTS 1 AND 2, 2008, 1020 : 1563 - 1570
  • [25] Testing of timber frames retrofitted with steel shear panels
    Bozer, Ali
    Altay, Gulay
    PROTECTION OF HISTORICAL BUILDINGS - PROHITECH 09, VOL 1 AND 2, 2009, : 1585 - 1590
  • [26] Numerical study on seismic performance of prefabricated steel frames with recentering energy dissipative braces
    Ye, Quanxi
    Wang, Zongyi
    Wang, Yuanqing
    ENGINEERING STRUCTURES, 2020, 207
  • [27] Pure aluminium shear panels as passive control system for seismic protection of steel moment resisting frames
    De Matteis, G
    Mazzolani, FM
    Panico, S
    STESSA 2003: BEHAVIOUR OF STEEL STRUCTURES IN SEISMIC AREAS, 2003, : 599 - 607
  • [28] Seismic performance assessment of steel building frames equipped with a novel type of bending dissipative braces
    Taiyari, Farshad
    Mazzolani, Federico M.
    Bagheri, Saman
    STEEL AND COMPOSITE STRUCTURES, 2019, 33 (04): : 525 - 535
  • [29] Experimental study on seismic performance of steel frames with external lightweight concrete composite wall panels
    Li Y.
    Gao C.
    Li X.
    Liu C.
    He W.
    Meng W.
    Jianzhu Jiegou Xuebao/Journal of Building Structures, 2021, 42 : 41 - 48
  • [30] Steel shear panels for anti-seismic elements
    Yamada, M
    LIGHT-WEIGHT STEEL AND ALUMINIUM STRUCTURES, 1999, : 853 - 860
12345