TOOL WEAR OF SUPERHARD CERAMIC COATED TOOLS IN DRILLING OF CFRP/TI STACKS

被引：0
|
作者：
Dinh Nguyen [1 ]
Voznyuk, Vadim [2 ,3 ]
Bin Abdullah, Mohammad Sayem [3 ]
Kim, Dave [3 ]
Kwon, Patrick Y. [1 ]
机构：
[1] Michigan State Univ, E Lansing, MI 48824 USA
[2] Intel Corp, Hillsboro, OR 97124 USA
[3] Washington State Univ, Vancouver, WA 98686 USA
来源：
PROCEEDINGS OF THE ASME 14TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2019, VOL 2 | 2019年
关键词：
DIAMOND-LIKE CARBON; TITANIUM-ALLOY; CUTTING TOOLS; HOLE QUALITY; FLANK WEAR; CARBIDE; COMPOSITE; PERFORMANCE; MECHANISMS; LIFE;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper aims to investigate the effectiveness of several superhard ceramic coatings on carbide drills when drilling carbon fiber reinforced plastics (CFRP) composite/Ti-6Al-4V alloy (titanium or Ti) stacks. The drilling experiments of CFRP/Ti stack are conducted with diamond-like coating (DLC) coated, alternating layers of the nanocomposite of AlCrN & Si3N4 and TiN or (AlCrSi/TON coated, and uncoated tungsten carbide drills. Tool wear evolution of each drill is measured qualitatively as well as quantitatively using the scanning electron and confocal laser scanning microscopes (CLSM) by interrupting after making certain numbers of hole. Based on our drilling experiments, the performance of each coating when drilling CFRP/Ti stack are discussed. Among these coated and uncoated drills, uncoated and DLC coated drills failed before making 5 holes while (AlCrSi/TON coated drills performed the best making more than 80 holes. The DLC coating, despite of high hardness of DLC coating, does not provide any significant protection especially when drilling Ti layer.
引用
收藏
页数：10
相关论文
共 50 条
  • [21] Ceramic drilling tools - Suitable for CFRP?
    Heisel U.
    Talpeanu D.
    Ivanova S.
    Pfeifroth T.
    ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb, 2010, 105 (10): : 851 - 854
  • [22] Detection of Tool Wear in Drilling CFRP/TC4 Stacks by Acoustic Emission
    Leng, Sheng
    Wang, Zhan
    Min, Tao
    Dai, Zhiqiang
    Chen, Gang
    JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES, 2020, 8 (03) : 463 - 470
  • [23] Multiple sensor monitoring for tool wear forecast in drilling of CFRP/CFRP stacks with traditional and innovative drill bits
    Caggiano, Alessandra
    Napolitano, Francesco
    Nele, Luigi
    Teti, Roberto
    11TH CIRP CONFERENCE ON INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING, 2018, 67 : 404 - 409
  • [24] Multiple sensor monitoring in drilling of CFRP/CFRP stacks for cognitive tool wear prediction and product quality assessment
    Caggiano, Alessandra
    Centobelli, Piera
    Nele, Luigi
    Teti, Roberto
    10TH CIRP CONFERENCE ON INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING - CIRP ICME '16, 2017, 62 : 3 - 8
  • [25] A new approach for analyzing machining-induced damage in correlation with tool wear during dry drilling of CFRP/Ti stacks
    Mathiyazhagan, Vijayathithan
    Meena, Anil
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2024,
  • [26] Modeling and tool wear in drilling of CFRP
    Iliescu, D.
    Gehin, D.
    Gutierrez, M. E.
    Girot, F.
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2010, 50 (02): : 204 - 213
  • [27] A STUDY ON THE CUTTING PERFORMANCE OF DIAMOND COATED TOOLS - TOOL WEAR OF DIAMOND COATED TOOLS IN MACHINING OF CFRP
    USUKI, H
    NARUTAKI, N
    YAMANE, Y
    KARASUNO, S
    ITO, T
    BULLETIN OF THE JAPAN SOCIETY OF PRECISION ENGINEERING, 1991, 25 (01): : 35 - 36
  • [28] Tool wear mechanism in low-frequency vibration-assisted drilling of CFRP/Ti stacks and its individual layer
    Yang, Haojun
    Chen, Yan
    Xu, Jiuhua
    Ladonne, Mathieu
    Lonfier, Julian
    Fu, Yucan
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 104 (5-8): : 2539 - 2551
  • [29] Evaluation of the performance of coated and uncoated carbide tools in drilling thick CFRP/aluminium alloy stacks
    M. Montoya
    M. Calamaz
    D. Gehin
    F. Girot
    The International Journal of Advanced Manufacturing Technology, 2013, 68 : 2111 - 2120
  • [30] Evaluation of the performance of coated and uncoated carbide tools in drilling thick CFRP/aluminium alloy stacks
    Montoya, M.
    Calamaz, M.
    Gehin, D.
    Girot, F.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 68 (9-12): : 2111 - 2120
12345