3D CFD simulation of air cooled condenser-I: Natural convection over a circular cylinder

The objective of this work is to investigate the transient 3D numerical simulations of natural convection of air around a circular cylinder (76.2 mm OD) enclosed in a box of 1000 mm x 600 mm x 1200 mm for a Rayleigh number of 1.3 x 10(6). The 2D numerical simulations have also been performed and the comparison between the 2D and 3D simulations has been presented in terms of the Nusselt number. The effect of clearance between the top wall and the cylinder (0.2 <= H*/D <= 2.3) on the flow pattern has also been investigated for the case of conducting ceiling. The flow becomes 3D, unstable and oscillating when the H*/D ratio is 0.2, and as the H*/D ratio is increased to 0.4, 1 and then to 2.3; the flow becomes 2D and stable. The studies of Cesini et al. (1999) [5] and Newport et al. (2001) [7] have also been analyzed by 2D and 3D numerical simulations. The flow shows 3D, unstable and oscillatory behavior in the case of Cesini et al. (1999) [5] due to the wall-cylinder interaction. However, the flow was found to be 2D and stable for the case of Newport et al. (2001) [7]. A comparison between our results and their numerical and experimental results has been presented. The time varying behavior of the surface averaged Nusselt number has been estimated, and it was found that, the time to reach the steady state for the flow depends on the aspect ratio of the geometry and 3D nature of the natural convection. (C) 2014 Elsevier Ltd. All rights reserved.