Creep Effects in Pultruded FRP Beams

被引:6
|
作者
Boscato, G. [1 ]
Casalegno, C. [2 ]
Russo, S. [2 ]
机构
[1] IUAV Univ Venice, Lab Strength Mat, Via Torino 153-a, I-30121 Venice, Italy
[2] IUAV Univ Venice, Dept Design Complex Environm, Dorsoduro 2206, I-30123 Venice, Italy
关键词
creep; pultruded GFRP beams; laboratory tests; buckling; GFRP ELEMENTS; BEHAVIOR; FAILURE;
D O I
10.1007/s11029-016-9555-6
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
The paper presents results of two creep tests on pultruded open-section GFRP beams aimed to evaluate the long-term deformations, the residual deflection after unloading, and the influence of creep strains on the flexuraltorsional buckling phenomenon. Two beams were subjected to a constant load for about one year. Then one of the beams was unloaded to evaluate its residual deflection. For the other beam, the load was increased up to failure, and the residual buckling strength was compared with that of a similar beam tested up to failure. The parameters of the Findley power law are evaluated, and the experimental results are compared with those of numerical analyses and with available formulations for prediction of the time-dependent properties of composite beams. Results of the investigation testify, in particular, to a noninsignificant time-dependent increment in deflections of the beams and to a significant reduction in their buckling strength due to creep deformations.
引用
收藏
页码:27 / 42
页数:16
相关论文
共 50 条
  • [21] Characterization Specifications for FRP Pultruded Materials: From Constituents to Pultruded Profiles
    Harati Khalilabad, Ehsan
    Ruiz Emparanza, Alvaro
    De Caso, Francisco
    Roghani, Hossein
    Khodadadi, Nima
    Nanni, Antonio
    FIBERS, 2023, 11 (11)
  • [22] Flexural strength of pultruded FRP shapes
    Luo, Xinyi
    Li, Shunlin
    Nanjing Hangkong Hangtian Daxue Xuebao/Journal of Nanjing University of Aeronautics and Astronautics, 2002, 34 (03):
  • [23] Pultruded FRP Beams with Embedded Fibre Bragg Grating Optical Sensors for Strain Measurement and Failure Detection
    Maldonado-Hurtado, Daniel
    Madrigal, Javier
    Penades, Antonio
    Ruiz, Rocio
    Crespo, Ana Isabel
    Sales, Salvador
    SENSORS, 2021, 21 (21)
  • [24] Experimental, analytical and numerical investigation of pultruded GFRP composite beams infilled with hybrid FRP reinforced concrete
    Gemi, Lokman
    Madenci, Emrah
    Ozkilic, Yasin Onuralp
    ENGINEERING STRUCTURES, 2021, 244
  • [25] Dissipative capacity on FRP spatial pultruded structure
    Boscato, Giosue
    Russo, Salvatore
    COMPOSITE STRUCTURES, 2014, 113 : 339 - 353
  • [26] Robustness of simple joints in pultruded FRP frames
    Qureshi, Jawed
    Mottram, J. Toby
    Zafari, Behrouz
    STRUCTURES, 2015, 3 : 120 - 129
  • [27] Research Progress on Creep Response of FRP-strengthened Reinforced Concrete Beams
    Yao W.
    Jiang S.
    Cai T.
    Gong H.
    Tao S.
    Cailiao Daobao/Materials Reports, 2019, 33 (09): : 2890 - 2901
  • [28] Application of injection bolts in pultruded FRP Profiles
    van Wingerde, AM
    van Delft, DRV
    Knudsen, ES
    ADVANCING AFFORDABLE MATERIALS TECHNOLOGY, 2001, 33 : 636 - 647
  • [29] Longitudinal lap splices for pultruded FRP tubes
    Merkes, D
    Bank, LC
    MATERIALS AND CONSTRUCTION: EXPLORING THE CONNECTION, 1999, : 60 - 67
  • [30] Evaluation of pultruded FRP composites for structural applications
    Maji, AK
    Acree, R
    Satpathi, D
    Donnelly, K
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 1997, 9 (03) : 154 - 158