Creep Effects in Pultruded FRP Beams

被引:6
|
作者
Boscato, G. [1 ]
Casalegno, C. [2 ]
Russo, S. [2 ]
机构
[1] IUAV Univ Venice, Lab Strength Mat, Via Torino 153-a, I-30121 Venice, Italy
[2] IUAV Univ Venice, Dept Design Complex Environm, Dorsoduro 2206, I-30123 Venice, Italy
关键词
creep; pultruded GFRP beams; laboratory tests; buckling; GFRP ELEMENTS; BEHAVIOR; FAILURE;
D O I
10.1007/s11029-016-9555-6
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
The paper presents results of two creep tests on pultruded open-section GFRP beams aimed to evaluate the long-term deformations, the residual deflection after unloading, and the influence of creep strains on the flexuraltorsional buckling phenomenon. Two beams were subjected to a constant load for about one year. Then one of the beams was unloaded to evaluate its residual deflection. For the other beam, the load was increased up to failure, and the residual buckling strength was compared with that of a similar beam tested up to failure. The parameters of the Findley power law are evaluated, and the experimental results are compared with those of numerical analyses and with available formulations for prediction of the time-dependent properties of composite beams. Results of the investigation testify, in particular, to a noninsignificant time-dependent increment in deflections of the beams and to a significant reduction in their buckling strength due to creep deformations.
引用
收藏
页码:27 / 42
页数:16
相关论文
共 50 条
  • [1] Creep Effects in Pultruded FRP Beams
    G. Boscato
    C. Casalegno
    S. Russo
    Mechanics of Composite Materials, 2016, 52 : 27 - 42
  • [2] Lateral buckling of pultruded FRP beams
    Ascione, L.
    Giordano, A.
    Spadea, S.
    COMPOSITES PART B-ENGINEERING, 2011, 42 (04) : 819 - 824
  • [3] Local buckling of pultruded FRP beams - Analysis and design
    Bank, LC
    Gentry, TR
    Nadipelli, M
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 1996, 15 (03) : 283 - 294
  • [4] Lateral-Torsional Buckling design for pultruded FRP beams
    Nguyen, T. T.
    Chan, T. M.
    Mottram, J. T.
    COMPOSITE STRUCTURES, 2015, 133 : 782 - 793
  • [5] Numerical Investigation of Creep Effects on FRP-Strengthened RC Beams
    Choi, Kyoung-Kyu
    Taha, Mahmoud M. Reda
    Masia, Mark J.
    Shrive, Penelope L.
    Shrive, Nigel G.
    JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2010, 14 (06) : 812 - 822
  • [6] Postbuckling failure analysis of pultruded FRP beams under uniform bending
    Laudiero, Ferdinando
    Minghini, Fabio
    Tullini, Nerio
    COMPOSITES PART B-ENGINEERING, 2013, 54 : 431 - 438
  • [7] Simplified Buckling-Strength Determination of Pultruded FRP Structural Beams
    Prachasaree, Woraphot
    Limkatanyu, Suchart
    Kaewjuea, Wichairat
    GangaRao, Hota V. S.
    PRACTICE PERIODICAL ON STRUCTURAL DESIGN AND CONSTRUCTION, 2019, 24 (02)
  • [8] Multiobjective material architecture optimization of pultruded FRP I-beams
    Davalos, JF
    Qiao, PZ
    Barbero, EJ
    COMPOSITE STRUCTURES, 1996, 35 (03) : 271 - 281
  • [9] Flexural stiffness characterization of fiber reinforced plastic (FRP) pultruded beams
    Santos Neto, Almir Barros da S.
    La Rovere, Henriette Lebre
    COMPOSITE STRUCTURES, 2007, 81 (02) : 274 - 282
  • [10] Novel joint for pultruded FRP beams and concrete-filled FRP columns: Conceptual and experimental investigations
    Feng, Peng
    Li, Zhiyuan
    Wang, Jie
    Liu, TianQiao
    COMPOSITE STRUCTURES, 2022, 287