Preparation and Microstructure Characterization of Ti-Based Alloy (TiAl plus Ti) by Hot-pressed Sintering

被引：0

作者：

Yu Qiuying ^{[1
]}

Fang Shuang ^{[1
]}

Xiong Huaping ^{[1
,2
]}

Zhao Hengyue

Zhang Mincong ^{[1
]}

Wang Shuyun ^{[1
]}

机构：

[1] Beijing Inst Aeronaut Mat, Beijing 100095, Peoples R China

[2] Shenyang Aircraft Corp, Shenyang 110013, Peoples R China

来源：

RARE METAL MATERIALS AND ENGINEERING | 2017年 / 46卷 / 05期

关键词：

TiAl intermetallic; titanium based alloy; hot-press sintering; diffusion reaction; microstructure; FUNCTIONALLY GRADED MATERIAL; GAMMA-TITANIUM ALUMINIDES; HIGH-TEMPERATURE; DESIGN;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

TiAl strengthened Ti-based alloy was prepared by hot-pressed sintering of mixed powders of TiAl and Ti at 1473 K under a pressure of 30 MPa for 1.5 h. The effects of composition ratio on the phase constituent and microstructures of hot-pressed sintering products were subsequently analyzed by XRD and SEM. A large difference exists in the phase distribution for the sintering products with different composition ratios. The feasibility of TiAl reinforced Ti-based alloy is confirmed with TiAl/Ti volume ratio of 7:3. Element Fe is concentrated in Ti2Al and Ti3Al. TiAl, Ti2Al(Fe), Ti3Al(Fe) and Ti-based phases are mainly formed in the sintered product. Different types of diffusion reactions occur within the sintered body during hot-pressed sintering, and finally fine graded microstructures, Ti/Ti3Al(Fe)//Ti2Al(Fe)/TiAl, are formed.

引用

页码：1370 / 1374

页数：5

共 16 条

[11] PLASTIC-DEFORMATION OF TIAL
SHECHTMAN, D
BLACKBURN, MJ
LIPSITT, HA
[J]. METALLURGICAL TRANSACTIONS, 1974, 5 (06): : 1373 - 1381
[12] Ternary diffusion and thermodynamic interaction in the β solid solutions of Ti-Al-Fe alloys at 1423 K
Takahashi, Tomoshi
Minamino, Yoritoshi
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2012, 545 : 168 - 175
[13] Electronic structures and transformations of intermediate phases and intermetallic compounds of binary Ti-Al alloys
Tan, Xun-qiong
Chen, Jie
Zhi, Wei
Brown, John
[J]. PHYSICA B-CONDENSED MATTER, 2010, 405 (17) : 3543 - 3546
[14] Design and fabrication of W-Mo-Ti-TiAl-Al system functionally graded material
Xiong, HP
Zhang, LM
Chen, LD
Yuan, RZ
Hirai, T
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2000, 31 (09): : 2369 - 2376
[15] Design and microstructures of Ti/TiAl/Al system functionally graded material
Xiong, HP
Shen, Q
Li, JG
Zhang, LM
Yuan, RZ
[J]. JOURNAL OF MATERIALS SCIENCE LETTERS, 2000, 19 (11) : 989 - 993
[16] Yonggang Zhang, STRUCTURAL INTERMETA

← 1 2 →