Effect of welding process on fatigue crack growth behaviour of austenitic stainless steel welds in a low alloy (Q&T) steel

Fatigue crack growth behaviour from a lack of penetration (LOP) defect in austenitic stainless steel weld metals of cruciform joints made of a low alloy high strength (Q&T) steel has been studied to understand the effect of two welding processes, namely, shielded metal are welding (SMAW) and flux cored are welding (FCAW). Fatigue crack growth studies were carried out at a stress ratio of R=0 and a frequency of 90 to 110 Hz in a resonant testing equipment (Rumul, Model:8601). Crack growth rates were relatively lower in the weld metal obtained by flux cored are welding process. Microstructural features observed revealed marked difference in the morphology of delta ferrite for the welded joints obtained from the above two welding processes. Long streaks of delta ferrite in austenite matrix were found in case of SMAW-weld metal which seem to have lowered the resistance to the fatigue crack propagation. A discontinuous network of delta ferrite found in austenite matrix in the case of FCAW-weld metal seems to have contributed to slower propagation of fatigue crack. Fractographic features also substantiate the observed trends in the fatigue crack growth behaviour.