Evolution of the residual stress in solid oxide fuel cell during creep

被引:4
|
作者
Zhao, Xiang [1 ]
Lu, Yongjun [1 ]
Song, Xu [1 ]
Wang, Fenghui [1 ]
机构
[1] Northwestern Polytech Univ, Dept Engn Mech, Xian 710129, Shaanxi, Peoples R China
基金
中国国家自然科学基金;
关键词
Multilayer structure; Creep deformation; Stress; Solid oxide fuel cell; Curvature; MECHANICAL-PROPERTIES; DEFORMATION; PROBABILITY; BEHAVIOR; FAILURE; CERMETS; DAMAGE;
D O I
10.1007/s41779-018-0277-1
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The evolutions of stress in the multilayer structure of solid oxide fuel cell (SOFC) working under high temperature are calculated by an analytical model. A finite element model is established to validate the results of the present model. The results show that, the present model can be used to analyze the stress relaxation of the SOFC during creep, the stresses both in anode and electrolyte drop dramatically at the first time, but the stress in cathode is first increased and then decreased. The stress relaxation rates of the anode, electrolyte, and cathode of SOFC are 97.87%, 94.91%, and 57.36%, respectively. The creep behavior of electrolyte has little effect on the stress redistribution of the single cell, while anode as well as cathode plays an important role in the evolution of the residual stress and curvature.
引用
收藏
页码:681 / 687
页数:7
相关论文
共 50 条
  • [21] An Anisotropic Microstructure Evolution in a Solid Oxide Fuel Cell Anode
    Grzegorz Brus
    Hiroshi Iwai
    Janusz S. Szmyd
    Nanoscale Research Letters, 2020, 15
  • [22] Modelling the impact of creep on the probability of failure of a solid oxide fuel cell stack
    Greco, Fabio
    Frandsen, Henrik Lund
    Nakajo, Arata
    Madsen, Mads Find
    Van Herle, Jan
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2014, 34 (11) : 2695 - 2704
  • [23] Creep analysis of solid oxide fuel cell with bonded compliant seal design
    Jiang, Wenchun
    Zhang, Yucai
    Luo, Yun
    Gong, J. M.
    Tu, S. T.
    JOURNAL OF POWER SOURCES, 2013, 243 : 913 - 918
  • [24] High temperature creep strength design and optimization of solid oxide fuel cell
    Wang, Yu
    Jiang, Wenchun
    Luo, Yun
    Song, Ming
    Tu, Shan -Tung
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2022, 47 (50) : 21450 - 21461
  • [25] Effect of Component Thickness and Anode Composition on the Residual Stress of Micro-Tubular Solid Oxide Fuel Cell
    Su, Shichuan
    Zhang, Wenxuan
    Wu, Jie
    Zhou, Congcong
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2017, 12 (10): : 9121 - 9130
  • [26] Modeling of solid oxide fuel cell sintering stress and deformation
    Deng, Tao
    Xiao, Liusheng
    Sun, Kaihua
    Sun, Zaihong
    Xie, Chao
    Zhu, Jianzhong
    Han, Minfang
    Yuan, Jinliang
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2024, 265
  • [27] Using short-time creep relaxation effect to decrease the residual stress in the bonded compliant seal of planar solid oxide fuel cell - A finite element simulation
    Zhang, Yu-Cai
    Jiang, Wenchun
    Tu, Shan-Tung
    Wen, Jian-Feng
    Woo, Wanchuck
    JOURNAL OF POWER SOURCES, 2014, 255 : 108 - 115
  • [28] Residual stress and redox cycling of segmented-in-series solid oxide fuel cells
    Fujita, K.
    Somekawa, T.
    Hatae, T.
    Matsuzaki, Y.
    JOURNAL OF POWER SOURCES, 2011, 196 (21) : 9022 - 9026
  • [29] Simulation of creep and damage in the bonded compliant seal of planar solid oxide fuel cell
    Zhang, Yu-Cai
    Jiang, Wenchun
    Tu, Shan-Tung
    Wen, Jian-Feng
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2014, 39 (31) : 17941 - 17951
  • [30] Solid oxide fuel cell
    Wang, Xuan
    FUEL CELL ELECTRONICS PACKAGING, 2007, : 97 - 111