Metrological Investigation of a Selective Laser Melting Additive Manufacturing System: A Case Study

被引：10
|
作者：
Aidibe, Ali [1 ]
Tahan, Antoine [1 ]
Brailovski, Vladimir [1 ]
机构：
[1] Ecole Technol Super, Dept Mech Engn, Montreal, PQ H3C 1K3, Canada
来源：
IFAC PAPERSONLINE | 2016年 / 49卷 / 31期
关键词：
Additive Manufacturing; Dimensional and Geometric Measurement; 3D Printing; Metrology;
D O I：
10.1016/j.ifacol.2016.12.156
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
Despite all the improvements that have occurred in the last three decades, surface finish and the cost of production arc among the main barriers preventing the widespread application of metallic Additive Manufacturing (AM) process in the industry. This paper presents a metrological performance investigation study for a Selective Laser Melting (SLM) system. In order to do so, an experimental procedure is performed to evaluate the technical performances of the process in terms of repeatability, geometric and dimensional capabilities, and the effects of part removal. The results of the investigation show that SLM appears to be a very repeatable process requiring particular attention during part removal, and it could be considered a suitable candidate for high technology applications. (C) 2016, IFAC (International Federation of Automatic Control) Hosting by Elsevier Ltd. All rights reserved.
引用
收藏
页码：25 / 29
页数：5
相关论文
共 50 条
  • [1] Dynamic investigation on the powder spreading during selective laser melting additive manufacturing
    Yao, Dengzhi
    An, Xizhong
    Fu, Haitao
    Zhang, Hao
    Yang, Xiaohong
    Zou, Qingchuan
    Dong, Kejun
    ADDITIVE MANUFACTURING, 2021, 37
  • [2] Investigation on Additive Manufacturing of tungsten carbide-cobalt by Selective Laser Melting
    Uhlmann, Eckart
    Bergmann, Andre
    Gridin, Witalij
    MIC2015 -15TH MACHINING INNOVATIONS CONFERENCE FOR AEROSPACE INDUSTRY, 2015, 35 : 8 - 15
  • [3] Additive Manufacturing of Vascular Implants by Selective Laser Melting
    Wessarges, Y.
    Hagemann, R.
    Gieseke, M.
    Noelke, C.
    Kaierle, S.
    Schmidt, W.
    Schmitz, K-P
    Haferkamp, H.
    BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK, 2014, 59 : S385 - +
  • [4] Mossbauer Spectroscopy for Additive Manufacturing by Selective Laser Melting
    Ivanova, Tatiana
    Mashlan, Miroslav
    Ingr, Tomas
    Dolakova, Hana
    Sarychev, Dmitry
    Sedlacova, Anna
    METALS, 2022, 12 (04)
  • [5] Additive manufacturing of cardiovascular CoCr stents by selective laser melting
    Demir, Ali Gokhan
    Previtali, Barbara
    MATERIALS & DESIGN, 2017, 119 : 338 - 350
  • [6] Additive manufacturing of magnetic materials using selective laser melting
    Obeid, B.
    Pietroy, D.
    Bayard, B.
    Chatelon, J. P.
    Capraro, S.
    Rousseau, J. J.
    3D PRINTED OPTICS AND ADDITIVE PHOTONIC MANUFACTURING II, 2020, 11349
  • [7] Research Progress on Absorptivity of Selective Laser Melting Additive Manufacturing
    Li S.
    Fu G.
    Li H.
    Peng Q.
    Xiao H.
    Zhang J.
    Zhang Z.
    Cailiao Daobao/Materials Reports, 2023, 37 (24):
  • [8] Investigation of Interaction between Vapor Plume and Spatter During Selective Laser Melting Additive Manufacturing
    Jie, Yin
    Liang, Hao
    Yang Liangliang
    Yan, Li
    Zheng, Li
    Sun Qinglei
    Bin, Shi
    CHINESE JOURNAL OF LASERS-ZHONGGUO JIGUANG, 2022, 49 (14):
  • [9] Dynamic behaviours of powder particles in selective laser melting additive manufacturing
    Chen, Hui
    Yan, Wentao
    Lixue Xuebao/Chinese Journal of Theoretical and Applied Mechanics, 2021, 53 (12): : 3206 - 3216
  • [10] Additive Manufacturing of Magnesium Alloys by Selective Laser Melting Technology: A Review
    Peng Liming
    Deng Qingchen
    Wu Yujuan
    Fu Penghuai
    Liu Ziyi
    Wu Qianye
    Chen Kai
    Ding Wenjiang
    ACTA METALLURGICA SINICA, 2023, 59 (01) : 31 - 54
12345