Research Progress on Absorptivity of Selective Laser Melting Additive Manufacturing

被引：0
|
作者：
Li S. [1 ]
Fu G. [1 ,2 ,3 ]
Li H. [1 ]
Peng Q. [1 ]
Xiao H. [1 ]
Zhang J. [2 ]
Zhang Z. [1 ]
机构：
[1] College of Mechanical Engineering, Guizhou University, Guiyang
[2] State Key Laboratory of Public Big Data, Guizhou University, Guiyang
[3] ‘Internet Plus’Key Laboratory of Collaborative Intelligent Manufacturing, Guizhou Province, Guiyang
来源：
Cailiao Daobao/Materials Reports | 2023年 / 37卷 / 24期
基金：
中国国家自然科学基金;
关键词：
absorptivity; additive manufacturing; experimental detection; numerical simulation; selective laser melting;
D O I：
10.11896/cldb.22040104
中图分类号：
学科分类号：
摘要：
Material absorptivity in selective laser melting additive manufacturing is a problem with scientific and practical significance. Its study is a prerequisite for simulating process accuracy and defining a set of process conditions for the selected metal powder material to make it more suitable for selective laser melting and forming. This paper introduces the interaction mechanism between the laser and powder bed. It summarises widely used measurement methods of absorptivity in selective laser melting and reviews the progress of different methods in absorptivity research. The characteristics of various methods and their applications are comparatively analysed,focusing on the detailed discussion of the factors that may influence absorptivity. The paper concludes with a summary of the current research progress,significant problems,and an outlook on absorptivity research. © 2023 Cailiao Daobaoshe/ Materials Review. All rights reserved.
引用
收藏
相关论文
共 129 条
  • [1] Abdulhameed O, Al-Ahmari A, Ameen W, Et al., Advances in Mechanical Engineering, 11, 2, (2019)
  • [2] Dilberoglu U M, Gharehpapagh B, Yaman U, Et al., Procedia Manufacturing, 11, (2017)
  • [3] Gu D D, Dai D H, Xia M J, Et al., Journal of Nanjing University of Aeronautics & Astronautics, 49, 5, (2017)
  • [4] Liang M, Li Z H, Liu M H, Et al., Materials Reports, 14, (2023)
  • [5] Peng L, Zheng Z J., Materials Reports, 8
  • [6] Fereiduni E, Ghasemi A, Elbestawi M., Aerospace, 7, 6, (2020)
  • [7] Wang D, Wang Y, Yang Y, Et al., Journal of Materials Processing Technology, 273, (2019)
  • [8] Attarilar S, Ebrahimi M, Djavanroodi F, Et al., International Journal of Bioprinting, 7, 1, (2021)
  • [9] Tian J, Huang Z H, Qi W J, Et al., Materials Reports, 31, (2017)
  • [10] Sing S L, Yeong W Y, Wiria F E, Et al., Rapid Prototyping Journal, 23, (2017)
12345678910