共 50 条
Durable and Multifunctional Superhydrophobic Coatings with Excellent Joule Heating and Electromagnetic Interference Shielding Performance for Flexible Sensing Electronics
被引:106
|作者:
Wu, Lisheng
[1
]
Wang, Ling
[1
]
Guo, Zheng
[1
]
Luo, Junchen
[1
]
Xue, Huaiguo
[1
]
Gao, Jiefeng
[1
,2
]
机构:
[1] Yangzhou Univ, Sch Chem & Chem Engn, Yangzhou 225002, Jiangsu, Peoples R China
[2] Sichuan Univ, State Key Lab Polymer Mat Engn, Chengdu 610065, Sichuan, Peoples R China
基金:
中国博士后科学基金;
关键词:
multifunctional;
superhydrophobic coating;
Joule heating;
strain sensor;
Ag nanoparticles;
STRAIN SENSORS;
CARBON;
FABRICATION;
COMPOSITES;
PARAMETERS;
MEMBRANES;
D O I:
10.1021/acsami.9b11895
中图分类号:
TB3 [工程材料学];
学科分类号:
0805 ;
080502 ;
摘要:
Superhydrophobic coatings have wide applications in many fields. However, superhydrophobic and smart coatings with multifunctionality and their applications in flexible sensing electronics are seldom reported. In this work, durable, superhydrophobic, and anticorrosive coatings with excellent Joule heating and electromagnetic interference (EMI) shielding performance are prepared on the basis of Ag precursor reduction and synchronous nonsolvent induced phase separation. Silver nanoparticles (AgNPs) coated with the copolymer (polystyrene-block-poly(ethylene-co-butylene)-block-polystyrene: SEBS) are uniformly distributed on the target substrate, forming mechanically durable conductive network. SEBS could not only endow the surface coating with superhydrophobicity but also improve the interaction among individual Ag nanoparticles and the interfacial adhesion between AgNPs and the substrate. The multifunctional coating possesses excellent anticorrosive, self-cleaning, and deicing properties. The high conductivity endows the coatings with excellent Joule heating and EMI shielding performance. The multifunctional coating can be applied to a variety of different substrates with outstanding surface stability and reliability. The conductivity for the smart coating can reach as high as 107 S/cm with the EMI shielding effectiveness up to 37.8 dB. At a low applied voltage of 1 V, the conductive fabric can be heated up to over 80 degrees C in 60 s and displays good recyclability during dozens of heating and cooling cycles. The Joule heating-induced temperature increase could be used for efficient surface deicing. When used for the flexible and wearable strain sensors, the multifunctional coating has a very low strain detection limit of 0.5% and large sensitivity (with the gauge factor as high as 1075) and excellent repeatability. In addition, it can be used for precisely monitoring different body motions, including both large and subtle joint movement.
引用
收藏
页码:34338 / 34347
页数:10
相关论文