Deformation and failure mechanism of dynamically loaded sandwich beams with aluminum-foam core

被引：86

作者：

Yu, JL ^{[1
]}

Wang, X ^{[1
]}

Wei, ZG ^{[1
]}

Wang, EH ^{[1
]}

机构：

[1] Univ Sci & Technol China, Key Lab Mech Behav & Design Mat, CAS, Hefei 230026, Anhui, Peoples R China

来源：

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING | 2003年 / 28卷 / 03期

关键词：

aluminum foam; foam core sandwich beams; dynamic response; impact failure; energy absorption;

D O I：

10.1016/S0734-743X(02)00053-2

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this paper the response and failure of dynamically loaded sandwich beams with an aluminum-foam core is investigated experimentally. The dynamic compressive stress-strain curves of the core material, an open-cell aluminum foam, are obtained by an SHPB technique. No strain-rate sensitivity is found. Quasi-static and dynamic bending tests are carried out for sandwich beams made of aluminum skins with an aluminum foam core. The deformation and failure mechanism are revealed by 'frozen' test using stop blocks. It is found that due to large local indentation and damage the energy absorbing capacity of beams loaded dynamically is lower than that for quasi-static loading. (C) 2002 Elsevier Science Ltd. All rights reserved.

引用

页码：331 / 347

页数：17

共 50 条

[21] THE EFFECT OF CONTACT RATIO ON THE COOLING PERFORMANCE OF AN ALUMINUM-FOAM HEAT SINK WITH A SOLID ALUMINUM CORE
Shih, Wei-Hung
Liu, Chin-Chia
Hsieh, Wen-Hsin
PROCEEDINGS OF THE ASME 12TH BIENNIAL CONFERENCE ON ENGINEERING SYSTEMS DESIGN AND ANALYSIS - 2014, VOL 3, 2014,
[22] Three-point bending of physically asymmetric metal sandwich beams with aluminum foam core: Failure behavior and optimal design
Wang, Mingshi
Yu, Xuehui
Zhang, Jianxun
Qin, Qinghua
COMPOSITE STRUCTURES, 2022, 280
[23] A Mechanics of Materials/Fracture Mechanics Analysis of Core Shear Failure in Foam Core Composite Sandwich Beams
Gibson, Ronald F.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS, 2011, 13 (01) : 83 - 95
[24] Three-point bending responses of aluminum foam core sandwich beams at elevated temperatures
Li Z.-B.
Lu F.-Y.
Beijing Ligong Daxue Xuebao/Transaction of Beijing Institute of Technology, 2016, 36 : 66 - 68
[25] Failure mode of aluminum foam sandwich panels
Zu, G.-Y. (zugy@smm.neu.edu.cn), 1600, Journal of Functional Materials (45):
[26] Deformation and failure of clamped shallow sandwich arches with foam core subjected to projectile impact
Xie, Qinghai
Jing, Lin
Wang, Zhihua
Zhao, Longmao
COMPOSITES PART B-ENGINEERING, 2013, 44 (01) : 330 - 338
[27] Size effects in metallic foam core sandwich beams
Kesler, O
Gibson, LJ
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 326 (02): : 228 - 234
[28] The plastic collapse of sandwich beams with a metallic foam core
Chen, C
Harte, AM
Fleck, NA
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2001, 43 (06) : 1483 - 1506
[29] Analysis of crack kinking in foam core sandwich beams
Yokozeki, Tomohiro
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2011, 42 (10) : 1493 - 1499
[30] Creep response of sandwich beams with a metallic foam core
Chen, C
Fleck, NA
Ashby, MF
ADVANCED ENGINEERING MATERIALS, 2002, 4 (10) : 777 - 780

← 1 2 3 4 5 →