Deformation and failure mechanism of dynamically loaded sandwich beams with aluminum-foam core

被引：86

作者：

Yu, JL ^{[1
]}

Wang, X ^{[1
]}

Wei, ZG ^{[1
]}

Wang, EH ^{[1
]}

机构：

[1] Univ Sci & Technol China, Key Lab Mech Behav & Design Mat, CAS, Hefei 230026, Anhui, Peoples R China

来源：

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING | 2003年 / 28卷 / 03期

关键词：

aluminum foam; foam core sandwich beams; dynamic response; impact failure; energy absorption;

D O I：

10.1016/S0734-743X(02)00053-2

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this paper the response and failure of dynamically loaded sandwich beams with an aluminum-foam core is investigated experimentally. The dynamic compressive stress-strain curves of the core material, an open-cell aluminum foam, are obtained by an SHPB technique. No strain-rate sensitivity is found. Quasi-static and dynamic bending tests are carried out for sandwich beams made of aluminum skins with an aluminum foam core. The deformation and failure mechanism are revealed by 'frozen' test using stop blocks. It is found that due to large local indentation and damage the energy absorbing capacity of beams loaded dynamically is lower than that for quasi-static loading. (C) 2002 Elsevier Science Ltd. All rights reserved.

引用

页码：331 / 347

页数：17

共 50 条

[1] Deformation and perforation of sandwich panels with aluminum-foam core at elevated temperatures
Li, Zhibin
Zheng, Zhijun
Yu, Jilin
Lu, Fangyun
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2017, 109 : 366 - 377
[2] Failure of sandwich beams consisting of alumina face sheet and aluminum foam core in bending
Mohan, K
Hon, YT
Idapalapati, S
Seow, HP
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 409 (1-2): : 292 - 301
[3] FAILURE MODE MAPS FOR FOAM CORE SANDWICH BEAMS
TRIANTAFILLOU, TC
GIBSON, LJ
MATERIALS SCIENCE AND ENGINEERING, 1987, 95 : 37 - 53
[4] Failure of impact damaged foam core sandwich beams
Hallstrom, Stefan
Shipsha, Andrey
Zenkert, Dan
American Society of Mechanical Engineers, Applied Mechanics Division, AMD, 2000, 245 : 11 - 19
[5] The effect of shear on the local indentation and failure of sandwich beams with polymeric foam core loaded in flexure
Caprino, G.
Durante, M.
Leone, C.
Lopresto, V.
COMPOSITES PART B-ENGINEERING, 2015, 71 : 45 - 51
[6] Local indentation of aluminum foam core sandwich beams at elevated temperatures
Li, Zhibin
Chen, Xuguang
Jiang, Banghai
Lu, Fangyun
COMPOSITE STRUCTURES, 2016, 145 : 142 - 148
[7] Static and low-velocity impact behavior of sandwich beams with closed-cell aluminum-foam core in three-point bending
Yu, Jilin
Wang, Erheng
Li, Jianrong
Zheng, Zhijun
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2008, 35 (08) : 885 - 894
[8] In-Plane Bending and Failure Mechanism of Sandwich Beams with GFRP Skins and Soft Polyurethane Foam Core
Mathieson, Hale
Fam, Amir
JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2016, 20 (01)
[9] Investigation of the nonlinear behaviour of damping of aluminum foam core sandwich composite beams
Fereidoon, A.
Niyari, A. Hazrati
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2012, 31 (09) : 639 - 653
[10] Failure prediction of in-plane loaded sandwich beams with core junctions
Jakobsen, Johnny
Johannes, Martin
Bozhevolnaya, Elena
COMPOSITE STRUCTURES, 2008, 82 (02) : 194 - 200

← 1 2 3 4 5 →