Friction and wear behavior of nano/ultrafine-grained and heterogeneous ultrafine-grained 18Cr-8Ni austenitic stainless steels

被引：37

作者：

Liu, J. ^{[1
]}

Deng, X. T. ^{[1
]}

Huang, L. ^{[1
]}

Wang, Z. D. ^{[1
]}

机构：

[1] Northeastern Univ, State Key Lab Rolling & Automat, Shenyang 110819, Peoples R China

来源：

TRIBOLOGY INTERNATIONAL | 2020年 / 152卷

基金：

中国国家自然科学基金;

关键词：

Austenitic stainless steel; Friction and wear behavior; Heterogeneous ultrafine-grained steel; Strain-induced martensite; NANOCRYSTALLINE SURFACE-LAYER; SLIDING WEAR; HIGH-STRENGTH; DEFORMATION MECHANISM; FATIGUE BEHAVIOR; TRIBOLOGICAL PROPERTIES; FRACTURE-BEHAVIOR; SIZE DEPENDENCE; RUNNING-IN; DUCTILITY;

D O I：

10.1016/j.triboint.2020.106520

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The dry sliding friction and wear behavior of nano/ultrafine-grained (NG/UFG), heterogeneous ultrafine-grained (HUFG), and coarse-grained (CG) austenitic stainless steels was studied. The results revealed that the wear resistance of the samples increased with an increase in hardness under the applied load of 10 N. However, under the applied loads of 20 N and 30 N, the HUFG steel presented the best wear resistance. Analysis of the wear mechanism revealed that the HUFG structure with good comprehensive performances formed a continuous hardened layer early, which did not delaminate and peel off prematurely, thereby effectively resisting the damage of a Si3N4 ball. The epsilon- and alpha'-martensite were generated below the wear surfaces of the NG/UFG, HUFG, and CG samples after wear.

引用

页数：11

共 50 条

[21] Comparison of radiation-induced segregation in ultrafine-grained and conventional 316 austenitic stainless steels
Etienne, A.
Radiguet, B.
Cunningham, N. J.
Odette, G. R.
Valiev, R.
Pareige, P.
ULTRAMICROSCOPY, 2011, 111 (06) : 659 - 663
[22] Dynamic Behavior of Friction Ultrafine-Grained AA5052
Filippov, A. V.
Tarasov, S. Yu.
Podgornyh, O. A.
Shamarin, N. N.
Filippova, E. O.
PROCEEDINGS OF THE ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES, 2018, 2051
[23] Cryogenic tribological behavior of coarse, ultrafine grained and heterogeneous Fe-18Cr-8Ni austenitic stainless steel
Zhao, Liyuan
Li, Xiaolin
Ren, Yingjie
Li, Minzhe
Hou, Muchen
Sun, Guosheng
Hua, Ke
Wang, Haifeng
MATERIALS CHARACTERIZATION, 2024, 217
[24] Heterostructure alleviates L?ders deformation of ultrafine-grained stainless steels
Sun, Guosheng
Liu, Jizi
Zhu, Yuntian
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 848
[25] Sulfur and superplasticity in electrodeposited ultrafine-grained Ni
McFadden, SX
Mukherjee, AK
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 395 (1-2): : 265 - 268
[26] Effect of recrystallization on diffusion in ultrafine-grained Ni
Prokoshkina, Dania
Klinger, Leonid
Moros, Anna
Wilde, Gerhard
Rabkin, Eugen
Divinski, Sergiy V.
ACTA MATERIALIA, 2014, 69 : 314 - 325
[27] Mechanical behavior of ultrafine-grained Ni–carbon nanotube composite
Jonathan Nguyen
Troy B. Holland
Haiming Wen
Martin Fraga
Amiya Mukherjee
Enrique Lavernia
Journal of Materials Science, 2014, 49 : 2070 - 2077
[28] THE EFFECT OF BORON ON DISCONTINUOUS YIELDING OF ULTRAFINE-GRAINED AUSTENITIC STAINLESS-STEEL
KURZYDLOWSKI, K
VARIN, RA
TANGRI, K
ZEITSCHRIFT FUR METALLKUNDE, 1989, 80 (07): : 469 - 475
[29] Grain boundary segregation induced strengthening of an ultrafine-grained austenitic stainless steel
Abramova, M. M.
Enikeev, N. A.
Valiev, R. Z.
Etienne, A.
Radiguet, B.
Ivanisenko, Y.
Sauvage, X.
MATERIALS LETTERS, 2014, 136 : 349 - 352
[30] Microstructure and mechanical behavior of ultrafine-grained titanium
Gubicza, J.
Fogarassy, Zs.
Krallics, Gy.
Labar, J.
Toerkoely, T.
MATERIALS SCIENCE, TESTING AND INFORMATICS IV, 2008, 589 : 99 - +

← 1 2 3 4 5 →