Predictive modeling of deposition rate in electro-deposition of copper-tin using regression and artificial neural network

被引：11
|
作者：
Subramanian, K. [1 ]
Periasamy, V. M. [2 ]
Pushpavanam, Malathy [3 ]
Ramasamy, K. [4 ]
机构：
[1] AC Coll Engn & Technol, Dept Mech Engn, Karaikkudi 630004, Tamil Nadu, India
[2] BSAR Crescent Engn Coll, Madras 600048, Tamil Nadu, India
[3] Cent Electro Chem Res Inst, Karaikkudi 630006, Tamil Nadu, India
[4] Shanmuganathan Engn Coll, Dept Mech Engn, Arasampatti 622507, TN, India
来源：
JOURNAL OF ELECTROANALYTICAL CHEMISTRY | 2009年 / 636卷 / 1-2期
关键词：
Electroplating; Deposition rate; Regression; Anova; Neural network; WEAR; TOOL;
D O I：
10.1016/j.jelechem.2009.09.003
中图分类号：
O65 [分析化学];
学科分类号：
070302 ; 081704 ;
摘要：
The aim of this paper is to develop a model using artificial neural network for the electro-deposition of copper-tin alloy (bronze) based on the experimentally obtained data. Copper-tin alloy was electrodeposited from a cyanide bath. The coating composition was determined using X-ray fluorescence spectroscopy. The deposition rate was calculated from the mass. composition and area of the deposit and its approximate density. The results were used to create a model for the plating characteristics using ANN. The ANN model was compared with the regression model for analysis. (C) 2009 Elsevier B.V. All rights reserved.
引用
收藏
页码：30 / 35
页数：6
相关论文
共 50 条
  • [31] Forward and backward modeling of direct metal deposition using metaheuristic algorithms tuned artificial neural network and extreme gradient boost
    Ananda Rabi Dhar
    Dhrubajyoti Gupta
    Shibendu Shekhar Roy
    Aditya Kumar Lohar
    Progress in Additive Manufacturing, 2022, 7 : 627 - 641
  • [32] Predictive modeling and response analysis of spent catalyst bioleaching using artificial neural network
    Vyas S.
    Das S.
    Ting Y.-P.
    Bioresource Technology Reports, 2020, 9
  • [33] Predictive Modeling of the Uniaxial Compressive Strength of Rocks Using an Artificial Neural Network Approach
    Wei, Xin
    Shahani, Niaz Muhammad
    Zheng, Xigui
    MATHEMATICS, 2023, 11 (07)
  • [34] Predictive modeling of performance of a helium charged Stirling engine using an artificial neural network
    Ozgoren, Yasar Onder
    Cetinkaya, Selim
    Saridemir, Suat
    Cicek, Adem
    Kara, Fuat
    ENERGY CONVERSION AND MANAGEMENT, 2013, 67 : 357 - 368
  • [35] Nonlinear model predictive control of a multiscale thin film deposition process using artificial neural networks
    Kimaev, Grigoriy
    Ricardez-Sandoval, Luis A.
    CHEMICAL ENGINEERING SCIENCE, 2019, 207 : 1230 - 1245
  • [36] Predicting airborne chloride deposition in marine bridge structures using an artificial neural network model
    Jeon, Dongho
    Jung, Jahe
    Park, Jisun
    Min, Jiyoung
    Oh, Jae Eun
    Moon, Juhyuk
    Lee, Jong-Suk
    Yoon, Seyoon
    CONSTRUCTION AND BUILDING MATERIALS, 2022, 337
  • [37] Predictive Modeling of the Mechanical Properties of Alpha Alumina Using Artificial Neural Networks and Multiple Linear Regression
    Belghalem, H.
    Fissah, B.
    Djeddou, M.
    Hamidouche, M.
    GLASS AND CERAMICS, 2023, 80 (7-8) : 347 - 354
  • [38] Predictive Modeling of the Mechanical Properties of Alpha Alumina Using Artificial Neural Networks and Multiple Linear Regression
    H. Belghalem
    B. Fissah
    M. Djeddou
    M. Hamidouche
    Glass and Ceramics, 2023, 80 : 347 - 354
  • [39] Comparison of using regression modeling and an artificial neural network for herbage dry matter yield forecasting
    Majkovic, Darja
    O'Kiely, Padraig
    Kramberger, Branko
    Vracko, Marjan
    Turk, Jernej
    Pazek, Karmen
    Rozman, Crtomir
    JOURNAL OF CHEMOMETRICS, 2016, 30 (04) : 203 - 209
  • [40] Fabrication and characterization of copper-indium-diselenide (CuInSe2, CIS) thin film using one-step electro-deposition process
    Li, Libo
    Ma, Yue
    Gao, Guanxiong
    Wang, Wentao
    Guo, Shaowen
    You, Jun
    Xie, Jingchen
    JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 658 : 774 - 779
12345