Effect of Rolling Reduction on the P {011} ⟨455⟩ Recrystallization Texture in a Supersaturated Al-Mn-Mg Alloy

被引：0
|
作者：
Liu, W. C. [1 ]
Yuan, H. [1 ]
Huang, M. J. [2 ]
机构：
[1] Yanshan Univ, Coll Mat Sci & Engn, Key Lab Metastable Mat Sci & Technol, Qinhuangdao 066004, Peoples R China
[2] Nanchang Univ, Inst Engn Mech, Nanchang 330031, Jiangxi, Peoples R China
来源：
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2009年 / 40A卷 / 12期
基金：
中国国家自然科学基金;
关键词：
ALUMINUM-ALLOYS; EVOLUTION; ORIENTATION;
D O I：
10.1007/s11661-009-9998-7
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The hot band of a continuous cast (CC) Al-Mn-Mg alloy was cold rolled to different reductions ranging from 0 to 90 pct and then annealed at 482 degrees C for 3 hours. The effect of rolling reduction on the P recrystallization texture was investigated by X-ray diffraction. The results show that the recrystallization texture of the hot band is characterized by weak P orientation and 22.5 deg normal direction (ND) rotated cube orientation. The strength of the P texture increases with increasing rolling reduction. After 90 pct cold rolling, the recrystallization texture of the cold-rolled sheet is dominated by a strong P component.
引用
收藏
页码：2794 / 2797
页数：4
相关论文
共 50 条
  • [21] EFFECT OF PRETREATMENT AND TEXTURE ON RECOVERY AND RECRYSTALLIZATION IN AL-4.5MG-0.7MN ALLOY
    ENGLER, O
    HECKELMANN, I
    RICKERT, T
    HIRSCH, J
    LUCKE, K
    MATERIALS SCIENCE AND TECHNOLOGY, 1994, 10 (09) : 771 - 781
  • [22] Effect of intermediate heat treatment on microstructure and texture evolution of continuous cast Al-Mn-Mg alloy sheet
    Jiantao Liu
    S. W. Banovic
    R. J. Fields
    J. G. Morris
    Metallurgical and Materials Transactions A, 2006, 37 : 1887 - 1898
  • [23] Effect of recovery on the recrystallization texture of an Al-Mg alloy
    Liu, W. C.
    Li, J.
    Yuan, H.
    Yang, Q. X.
    SCRIPTA MATERIALIA, 2007, 57 (09) : 833 - 836
  • [24] Effect of pseudo cross-rolling on the recrystallization texture of a continuous cast Al-Mg alloy
    Liu, Wenchang
    Li, Xingyi
    Meng, Xiangcai
    SCRIPTA MATERIALIA, 2009, 60 (09) : 768 - 771
  • [25] Effect of cold rolling reduction on development of recrystallization textures in an Al-Mg-Si alloy
    Takeda, Hiroki
    Hibino, Akira
    Takata, Ken
    Keikinzoku/Journal of Japan Institute of Light Metals, 2012, 62 (02): : 60 - 66
  • [26] Effect of Si content on laser welding performance of Al-Mn-Mg alloy
    Zhao, Pi-zhi
    Liu, Jing
    Chi, Zhi-dong
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2014, 24 (07) : 2208 - 2213
  • [27] Study on the formation of P orientation in CC Al-Mn-Mg alloy by EBSD method
    Zeng, Q.
    Zhai, T.
    MICROSCOPY AND MICROANALYSIS, 2009, 15 : 404 - 405
  • [28] Impact of homogenization on recrystallization of a supersaturated Al-Mn alloy
    Birol, Yucel
    SCRIPTA MATERIALIA, 2009, 60 (01) : 5 - 8
  • [29] Shear texture and recrystallization texture formation in high speed hot rolling of Al-Mg alloy
    Sakai, T
    Lee, SH
    Yoneda, K
    Hamada, S
    Saito, Y
    RECRYSTALLIZATION AND GRAIN GROWTH, VOLS 1 AND 2, 2001, : 1255 - 1260
  • [30] Recrystallization textures of the M{113} ⟨1 1 0⟩ and P{011} ⟨4 5 5⟩ orientations in a supersaturated Al-Mn alloy
    Liu, W. C.
    Morris, J. G.
    SCRIPTA MATERIALIA, 2007, 56 (03) : 217 - 220
12345