Identification of structural parameters including crack using one dimensional PZT patch model

被引:4
|
作者
Jinesh, N. [1 ]
Shankar, K. [1 ]
机构
[1] Indian Inst Technol, Dept Mech Engn, Madras, Tamil Nadu, India
关键词
Structural identification; voltage matching; PZT patches; inverse problem; Particle Swarm Optimization; FINITE-ELEMENT; SYSTEM-IDENTIFICATION; PARTICLE SWARM; SMART BEAMS; DESIGN; HYBRID;
D O I
10.1080/17415977.2016.1240794
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This article presents a new concept of using the one-dimensional piezo-electric patch on beam model for structural identification (SI). A hybrid element constituted of one-dimensional beam element and a PZT sensor is used with reduced material properties. Accuracy of this element is first verified against a corresponding 3D finite element model. Then SI is carried out as an inverse problem whereby parameters are identified by minimizing the deviation between the predicted and measured voltage response of the patch, when subjected to impulse excitation. A non-classical optimization algorithm Particle Swarm Optimization is used to minimize this objective function. Identified parameters involve stiffness, damping as well as the depth and location of crack in a beam. The validity of the proposed approach is proved by numerical studies on a beam, nine member frame and crack depth and location identification using various patch lengths. The signals are polluted with 5% Gaussian noise to simulate experimental noise. The results show there is a significant improvement in identification accuracy compared to other methods. The proposed method is also successfully verified experimentally.
引用
收藏
页码:1216 / 1241
页数:26
相关论文
共 50 条
  • [31] Structural damage identification using transfer matrix with lumped crack properties
    Nandakumar, P.
    Shankar, K.
    INVERSE PROBLEMS IN SCIENCE AND ENGINEERING, 2016, 24 (03) : 422 - 447
  • [32] Using the Inverse Identification of Parameters of a Nonlinear Concrete Material Model for Analysis of RC Structural Element
    Kral, Petr
    Hradil, Petr
    Kala, Jiri
    Kola, Zdenek
    Hokes, Filip
    INTERNATIONAL CONFERENCE ON NUMERICAL ANALYSIS AND APPLIED MATHEMATICS (ICNAAM-2018), 2019, 2116
  • [33] Simulation of ultrafast heating induced structural dynamics using a one-dimensional spring model
    Li, Junjie
    Clinite, Rick
    Wang, Xuan
    Cao, Jianming
    PHYSICAL REVIEW B, 2009, 80 (01)
  • [34] Identification of the parameters contained in a cyclic cohesive zone model for fatigue crack propagation
    Papa, Tommaso
    Bocciarelli, Massimiliano
    ENGINEERING FRACTURE MECHANICS, 2023, 279
  • [35] One-dimensional nonlinear model for prediction of crack spacing in concrete pavements
    Chen, G
    Baker, G
    ADVANCES IN STRUCTURAL ENGINEERING, 2005, 8 (06) : 595 - 602
  • [36] Application of a Bayesian hierarchical model to system identification of structural parameters
    Kwag, Shinyoung
    Ju, Bu Seog
    ENGINEERING WITH COMPUTERS, 2020, 36 (02) : 455 - 474
  • [37] Application of a Bayesian hierarchical model to system identification of structural parameters
    Shinyoung Kwag
    Bu Seog Ju
    Engineering with Computers, 2020, 36 : 455 - 474
  • [38] Plasticity-damage model parameters identification for structural connections
    Imamovic, Ismar
    Ibrahimbegovic, Adnan
    Knopf-Lenoir, Catherine
    Mesic, Esad
    COUPLED SYSTEMS MECHANICS, 2015, 4 (04): : 337 - 364
  • [39] A structural model of one-dimensional thin silica nanowires
    Zhang, DJ
    Zhang, RQ
    CHEMICAL PHYSICS LETTERS, 2004, 394 (4-6) : 437 - 440
  • [40] Inverse method for identification of edge crack using correlation model
    Aye, Win Pa Pa
    Htike, Thein Min
    SN APPLIED SCIENCES, 2019, 1 (06):