Microstructure and properties of in situ nanometric Al2O3 reinforced α-Fe(Al)-Fe3Al-based composites

被引：14
|
作者：
Li, Jia [1 ]
Kwong, Fung-luen [2 ]
Shi, Riu-xia [1 ]
Ng, Dickon H. L. [2 ]
Yin, Yan-sheng [3 ]
机构：
[1] Univ Jinan, Dept Mat Sci & Engn, Jinan, Peoples R China
[2] Chinese Univ Hong Kong, Dept Phys, Hong Kong, Hong Kong, Peoples R China
[3] China Ocean Univ, Sch Mat Sci & Engn, Qingdao, Peoples R China
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2009年 / 526卷 / 1-2期
基金：
中国国家自然科学基金;
关键词：
Iron aluminides composite; Particulate-reinforced; Microstructure; Mechanical testing; IRON;
D O I：
10.1016/j.msea.2009.07.014
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The alpha phase Fe(Al)-Fe3Al-based composites reinforced with 4-9 vol.% alpha-Al2O3 dispersions were fabricated by hot-pressing sintering. Nanometer-sized alpha-Al2O3 dispersed homogeneously in the submicron alpha-Fe(Al) and Fe3Al matrix, with a 20% lattice-mismatch presented between alpha-Al2O3 and alpha-Fe(Al). Higher fracture toughness (39 MPa M-1/2) and bending strength (1260 MPa) were obtained for composites containing both intragranular and intergranular Al2O3 grains. The combination of fine grain strengthening with dispersion strengthening can account for the improvement of mechanical properties. (C) 2009 Elsevier B.V. All rights reserved.
引用
收藏
页码：50 / 55
页数：6
相关论文
共 50 条
  • [41] EFFECT OF MICROSTRUCTURE ON CYCLIC FATIGUE PROPERTIES OF AL2O3 CERAMICS AND AL2O3 COMPOSITES
    KAMIYA, H
    TAKATSU, M
    OHYA, K
    ANDO, M
    HATTORI, A
    NIPPON SERAMIKKUSU KYOKAI GAKUJUTSU RONBUNSHI-JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 1990, 98 (05): : 456 - 463
  • [42] Microstructure and mechanical properties of Fe3Al-based alloys with strengthening boride precipitates
    Krein, R.
    Schneider, A.
    Sauthoff, G.
    Frommeyer, G.
    INTERMETALLICS, 2007, 15 (09) : 1172 - 1182
  • [43] Crystallographic orientation relationship between Al2O3 and Al in in situ Al2O3 reinforced Al-4Mg matrix composites
    Ouyang, LZ
    Luo, CP
    ACTA METALLURGICA SINICA, 2005, 41 (07) : 750 - 754
  • [44] 球磨Fe3O4+Al制备Fe/α-Al2O3及选择刻蚀Fe制备α-Al2O3
    李志军
    世界有色金属, 2018, (09) : 5 - 6
  • [45] Microstructures and Mechanical Properties of Al/Al2O3 Cermet Composites Reinforced by Al/Al2O3 Core-shell Particles
    Kou, Huamin
    Pan, Yubai
    Guo, Jingkun
    THERMEC 2006 SUPPLEMENT: 5TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2007, 15-17 : 240 - 245
  • [46] REACTIONS OF ADSORBED HYDROGEN WITH OXYGEN ON FE/AL2O3, NI/AL2O3 AND FE-NI/AL2O3 CATALYSTS
    LESNIEWSKA, E
    RYNKOWSKI, J
    PARYJCZAK, T
    PRZEMYSL CHEMICZNY, 1995, 74 (01): : 21 - 22
  • [47] Sintering technology research of Fe3Al/Al2O3 ceramic composites
    Sun, KN
    Li, AM
    Cui, XM
    Yin, YS
    Li, PW
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 113 (1-3) : 482 - 485
  • [48] Effect of fabrication methods on microstructure and mechanical properties of Fe3Al-based alloys
    Wang, Jian
    Xing, Jiandong
    Qiu, Zhibin
    Zhi, Xiaohui
    Cao, Li
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 488 (01) : 117 - 122
  • [49] In situ fabrication and microstructure of Al2O3 particles reinforced aluminum matrix composites
    Wang, Hongming
    Li, Guirong
    Zhao, Yutao
    Chen, Gang
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (12): : 2881 - 2885
  • [50] Determining the effect of flake matrix size and Al2O3 content on microstructure and mechanical properties of Al2O3 nanoparticle reinforced Al matrix composites
    Varol, T.
    Canakci, A.
    Ozkaya, S.
    Erdemir, F.
    PARTICULATE SCIENCE AND TECHNOLOGY, 2018, 36 (03) : 312 - 323
12345