Intergranular Infiltration of TZM Alloy Joints Brazed Using Ni-Ti Brazing Filler Alloy at High Temperature

被引：0
|
作者：
Lu Quanbin [1 ]
Zhong Sujuan [1 ]
Li Shengnan [1 ,2 ]
Cheng Zhan [1 ]
Long Weimin [1 ]
机构：
[1] Zhengzhou Res Inst Mech Engn Co Ltd, State Key Lab Adv Brazing Filler Met & Technol, Zhengzhou 450001, Henan, Peoples R China
[2] Tsinghua Univ, Beijing 100084, Peoples R China
来源：
RARE METAL MATERIALS AND ENGINEERING | 2019年 / 48卷 / 08期
基金：
对外科技合作项目（国际科技项目）;
关键词：
TZM alloy; brazing; intergranular infiltration; mechanical property; MOLYBDENUM ALLOY; MICROSTRUCTURE; TI-6AL-4V; COMPOSITE; EVOLUTION;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The interfacial microstructure and joining properties of titanium-zirconium-molybdenum (TZM) alloy joints were characterized by SEM, EDS, XRD, mechanical tests, etc. The results show that the Ni-Ti brazing filler metal can efficiently realize the high-temperature vacuum brazing of TZM. Mo in the base metal and Ni in the braze filler metal form MoNi4 phase, which is the main reason for the metallurgical bond between the TZM and the Ni-13.7Ti/TZM interface region. Ti in Ni-44Ti braze filler metal dissolves in Mo to form an infinite solid solution in TZM/Ni-44Ti/TZM interface zone, forming a metallurgical bond between the braze filler metal and TZM. However, a serious intergranular infiltration phenomenon is observed when Ni-44Ti braze filler alloy is used to braze TZM alloy. The degree of intergranular infiltration and corrosion of the base material significantly decrease with decreasing the Ti content in the braze filler alloy. The average shear strength of TZM/Ni-13.7T/TZM brazed joints reaches 193 MPa, while that of TZM/Ni-44Ti/TZM brazed joints is 167 MPa. The lower shear strength of TZM/Ni-44Ti/TZM is attributed to the intergranular infiltration due to the higher content of Ti in the brazing filler.
引用
收藏
页码：2418 / 2423
页数：6
相关论文
共 50 条
  • [21] TZM/graphite interface behavior in high-temperature brazing by Ti-based brazing filler materials
    Quanbin Lu
    Weimin Long
    Sujuan Zhong
    Jian Qin
    Yongtao Jiu
    Huawei Sun
    Welding in the World, 2020, 64 : 1877 - 1885
  • [22] Interfacial Behavior and Thermostability of the TZM High Temperature Brazing Seam with Ti-based Brazing Filler Metals
    Lu, Quanbin
    Zhong, Sujuan
    Li, Shengnan
    Zhang, Lei
    Pei, Yinyin
    Long, Weimin
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2020, 49 (03): : 849 - 856
  • [23] Interfacial Behavior and Thermostability of the TZM High Temperature Brazing Seam with Ti-based Brazing Filler Metals
    Lu Quanbin
    Zhong Sujuan
    Li Shengnan
    Zhang Lei
    Pei Yinyin
    Long Weimin
    RARE METAL MATERIALS AND ENGINEERING, 2020, 49 (03) : 849 - 856
  • [24] TZM/graphite interface behavior in high-temperature brazing by Ti-based brazing filler materials
    Lu, Quanbin
    Long, Weimin
    Zhong, Sujuan
    Qin, Jian
    Jiu, Yongtao
    Sun, Huawei
    WELDING IN THE WORLD, 2020, 64 (11) : 1877 - 1885
  • [25] Effects of brazing temperature and post weld heat treatment on 7075 alloy brazed joints
    Niu, C. N.
    Song, X. G.
    Hu, S. P.
    Lu, G. Z.
    Chen, Z. B.
    Wang, G. D.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2019, 266 : 363 - 372
  • [26] Interfacial Microstructure and Mechanical Property of ZrO2 Joints Brazed with Ni-Ti Filler Metal
    Zhang Q.
    Wang J.
    Zheng K.
    Yang H.
    Wang, Juan (sweetanna@foxmail.com), 1600, Chinese Ceramic Society (48): : 1430 - 1436
  • [27] Structure and properties of the high temperature nitrided/oxided surface of Ni-Ti alloy
    Lelatko, J.
    Goryczka, T.
    Wierzchon, T.
    Morawiec, H.
    SMART MATERIALS FOR SMART DEVICES AND STRUCTURES, 2009, 154 : 53 - +
  • [28] High temperature creep measurements in equiatomic Ni-Ti shape memory alloy
    Lexcellent, C
    Robinet, P
    Bernardini, J
    Beke, DL
    Olier, P
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2005, 36 (10) : 509 - 512
  • [29] Effect of brazing parameters on microstructure and mechanical properties of Ti5Si3/Ti3Al composite joints brazed with Ti–Zr–Cu–Ni filler alloy
    Tongtong Zhang
    Yongsheng He
    Guohua Fan
    Kaixuan Wang
    Xianghong Liu
    Lin Geng
    Welding in the World, 2021, 65 : 1171 - 1180
  • [30] Microstructure and bonding strength of titanium-to-stainless steel joints brazed using a Zr–Ti–Ni–Cu–Be amorphous filler alloy
    Jung G. Lee
    J. K. Lee
    S. M. Hong
    M. K. Lee
    C. K. Rhee
    Journal of Materials Science, 2010, 45 : 6837 - 6840
12345