Experimental and Numerical Study of Cutting Forces and Temperature Fields When Dry Turning Aluminum Alloy

被引：0
|
作者：
Feng, Lin [1 ]
机构：
[1] Guangdong Polytech Normal Univ, Guangzhou 510635, Guangdong, Peoples R China
来源：
PROGRESS OF MACHINING TECHNOLOGY | 2009年 / 407-408卷
关键词：
Dry turning; Finite element method; Aluminum alloy;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A Lagrange finite element model is presented that simulates cutting forces and temperature distributions when orthogonal turning aluminum alloy. The effect of the large strain, strain-rate and temperature associated with cutting on the material properties is taken into account. The model predicts chip geometry, stress, strain and temperature distribution in the workpiece, chip, and tool. Cutting experiments were performed to validate the model.
引用
收藏
页码：465 / 468
页数：4
相关论文
共 50 条
  • [21] Numerical and experimental investigation of cutting forces in turning of Nimonic 80A superalloy
    Korkmaz, Mehmet Erdi
    Yasar, Nafiz
    Gunay, Mustafa
    ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH, 2020, 23 (03): : 664 - 673
  • [22] Study on the Cutting Performance of HFCVD Diamond coated Silicon Nitride Inserts in Dry Turning Aluminum Silicon Alloy
    Sun, Fanghong
    Shen, Bin
    Yang, Guodong
    ADVANCES IN ABRASIVE TECHNOLOGY XIII, 2010, 126-128 : 226 - 231
  • [23] Experimental investigation of the cutting temperature when turning with coated indexable inserts
    Grzesik, W
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1999, 39 (03): : 355 - 369
  • [24] Optimizing Cutting Parameters for Enhanced Control of Temperature, Cutting Forces, and Energy Consumption in Dry Turning of Ti6Al4V Alloy
    Fernandez, Manuel Herrera
    Martin-Bejar, Sergio
    Sevilla Hurtado, Lorenzo
    Vilches, Francisco Javier Trujillo
    MATERIALS, 2025, 18 (05)
  • [25] Experimental Analysis of the Cutting Forces Obtained in Dry Turning Processes of UNS A97075 Aluminium
    de Agustina, B.
    Bernal, C.
    Camacho, A. M.
    Rubio, E. M.
    MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE, (MESIC 2013), 2013, 63 : 694 - 699
  • [26] Experimental investigation and optimization of cutting parameters during dry turning process of copper alloy
    Tefera A.G.
    Sinha D.K.
    Gupta G.
    Journal of Engineering and Applied Science, 2023, 70 (1):
  • [27] Numerical and experimental study of dry cutting for an aeronautic aluminium alloy (A2024-T351)
    Mabrouki, Tarek
    Girardin, Francois
    Asad, Muhammad
    Rigal, Jean-Francois
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2008, 48 (11): : 1187 - 1197
  • [28] Dry cutting study of an aluminium alloy (A2024-T351): a numerical and experimental approach
    Asad, M.
    Girardin, F.
    Mabrouki, T.
    Rigal, J-F.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2008, 1 (Suppl 1) : 499 - 502
  • [29] Dry cutting study of an aluminium alloy (A2024-T351): a numerical and experimental approach
    M. Asad
    F. Girardin
    T. Mabrouki
    J.-F. Rigal
    International Journal of Material Forming, 2008, 1 : 499 - 502
  • [30] Optimization of cutting forces and surface roughness in dry turning of AM magnesium alloy using Taguchi method
    Kolluru, Uday Kiran
    Narala, Suresh Kumar Reddy
    Dutta, Sunil
    MATERIALS TODAY-PROCEEDINGS, 2021, 38 : 2830 - 2838
12345