Variation of martensite phase transformation mechanism in minor-stressed T91 ferritic steel

The effects of compressive stress applied at different temperatures on martensite transformation process of the T91 steel were studied by high-resolution differential dilatometer. The stress applied above 850 degrees C exhibits no influence on the martensite formation. The stress applied below 850 degrees C not only facilitates the formation of martensite, but also enhances the onset temperature of the martensite transformation. There are two different transformation mechanisms occurring: when the compressive stress is applied at high temperature, the mechanism of strain-induced martensite transformation takes place, as a result, the microstructure tends to be refined with irregular grain boundary. When the compressive stress is applied at low temperature, the stress-induced martensite transformation occurs, and its morphology is similar to that of thermal-activated martensite. In addition, it is summarized that 200 MPa is the critical stress and 440 C is critical temperature for the onset of the stress-induced martensite transformation for the investigated T91 ferritic steel. (C) 2009 Elsevier B.V. All rights reserved.