Characterization and evaluation of sheet molding compound roof tiles

被引：3

作者：

Setyanto, Djoko ^{[1
]}

机构：

[1] Atma Jaya Catholic Univ Indonesia, Jalan Jenderal Sudirman 51, Jakarta 12930, Indonesia

来源：

2ND INTERNATIONAL CONFERENCE ON SUSTAINABLE CIVIL ENGINEERING STRUCTURES AND CONSTRUCTION MATERIALS | 2014年 / 95卷

关键词：

SMC; roof tiles; production; mechanical properties; static load;

D O I：

10.1016/j.proeng.2014.12.210

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The characteristics of sheet molding compound (SMC) roof tiles are: lightness, high strength, high stiffness, and corrosion resistance. This paper describes a trial production of SMC roof tiles in a composite manufacturing industry in Tangerang, Indonesia. The SMC roof tiles samples were then characterized and evaluated to determine the mechanical properties of the material and the performance of the roof structure. Mechanical properties of the material, i. e. the tensile strength and the elastic modulus, were obtained from the tensile test. Evaluation of the SMC roof tiles as a roof structure was carried out by static loads testing of the roof structure model. The tensile test according to ASTM D638: 2003 shows that the tensile strength and the elastic modulus of the SMC material are 30 +/- 3 MPa and 10 +/- 1 GPa, respectively. Failure of the SMC roof tiles as a roof structure when loaded by static load of cylindrical steel loads due to crack occurred at 94 kgs load. (C) 2014 The Authors. Published by Elsevier Ltd.

引用

页码：498 / 503

页数：6

共 50 条

[31] THE EFFECTS OF MOLDING CONDITIONS ON THE SURFACE-COMPOSITION OF SHEET MOLDING COMPOUND
MCEWEN, DJ
NEWBOULD, J
POLYMER COMPOSITES, 1991, 12 (05) : 315 - 319
[32] Decreasing paint cost for sheet molding compound (SMC) compression molding
Cai, Kaiyu
Bhuyan, Mohammad S. K.
Zhang, Dan
Villarreal, Maria G.
Straus, Elliott J.
Lee, L. James
Castro, Jose M.
POLYMER ENGINEERING AND SCIENCE, 2021, 61 (01): : 211 - 220
[33] Simulation of compression molding for sheet molding compound considering the anisotropic effect
Lin, CM
Weng, CI
POLYMER COMPOSITES, 1999, 20 (01) : 98 - 113
[34] NUMERICAL-SIMULATION OF NONISOTHERMAL SMC (SHEET MOLDING COMPOUND) MOLDING
TWU, JT
HILL, RR
WANG, TJ
LEE, LJ
POLYMER COMPOSITES, 1993, 14 (06) : 503 - 514
[35] Simulation and analysis of sheet molding compound compression-molding flow
Wuhan Univ of Technology, Wuhan, China
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 1997, 14 (02): : 126 - 131
[36] The stamps on tiles and roof tiles in Selinunte
Jonasch, Melanie
GNOMON-KRITISCHE ZEITSCHRIFT FUR DIE GESAMTE KLASSISCHE ALTERTUMSWISSENSCHAFT, 2022, 94 (02): : 188 - 191
[37] ROOF STONES AND FLAT ROOF TILES
ENGLERT, G
LANDTECHNIK, 1980, 35 (10): : 470 - 473
[38] SIMULATION-BASED DESIGN OF SHEET MOLDING COMPOUND (SMC) COMPRESSION MOLDING
TWU, JT
LEE, LJ
CHEN, SC
POLYMER COMPOSITES, 1994, 15 (05) : 313 - 326
[39] VARIABILITY IN SHEET MOLDING COMPOUND (SMC) .2. PROCESSING AND MOLDING VARIABILITY
BURNS, R
HANKIN, AG
PENNINGTON, D
PLASTICS & POLYMERS, 1975, 43 (168): : 235 - 239
[40] Direct Bundle Simulation approach for the compression molding process of Sheet Molding Compound
Meyer, N.
Schoettl, L.
Bretz, L.
Hrymak, A. N.
Kaerger, L.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2020, 132

← 1 2 3 4 5 →