Reliability Analysis and Evaluation of Key Parts for Automobiles on the Basis of Dimensional Changes During High-Speed Operation

被引：5
|
作者：
Wang, Min-Long [1 ]
Liu, Xin-Tian [1 ]
Wang, Yan-Song [1 ]
Luo, Jiao [1 ]
机构：
[1] Shanghai Univ Sci Engn, Sch Automot Engn, Shanghai 201620, Peoples R China
来源：
JOURNAL OF TESTING AND EVALUATION | 2015年 / 43卷 / 06期
基金：
中国国家自然科学基金;
关键词：
reliability evaluation; censored number; probability and statistics; key parts; TAGUCHI METHOD; ROBUST DESIGN; SOLAR-ARRAY; PREDICTION; PROBABILITY; FAILURE; PRODUCT;
D O I：
10.1520/JTE20140403
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The dimensional changes of automobile parts during high-speed operation are essential to product reliability. To analyze the influences, a censored experiment was proposed in the paper. To conduct the analysis, the experiment was conducted on a clutch hub. First of all, the high-speed test of the hub was conducted and the deformation data was obtained. Then the censored number was calculated based on sample size and costs. Finally, the working speed and dimension range were calculated under reliability design requirements at a cost-effective basis. The proposed method could also be applied to other similar products for the reliability improvement and design.
引用
收藏
页码：1464 / 1471
页数：8
相关论文
共 50 条
  • [31] Analysis of Predictive Control Strategies for High-Speed Operation of PMSM Drive
    Hernandez, Julio
    Rangel-Magdaleno, Jose
    Morales-Caporal, Roberto
    2022 IEEE INTERNATIONAL AUTUMN MEETING ON POWER, ELECTRONICS AND COMPUTING (ROPEC), 2022,
  • [32] Reliability analysis of PVD-coated carbide tools during high-speed machining of Inconel 800
    Das, Monojit
    Naikan, V. N. A.
    Panja, Subhash Chandra
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART O-JOURNAL OF RISK AND RELIABILITY, 2024,
  • [33] Dimensional analysis of droplet size and ligament length during high-speed rotary bell atomization
    Lutz Gödeke
    Walter Oswald
    Norbert Willenbacher
    Peter Ehrhard
    Journal of Coatings Technology and Research, 2021, 18 : 75 - 81
  • [34] Three-dimensional thermal stress analysis of the mould during high-speed casting of steel
    Xie, Y-M
    Yin, S-R
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2008, 43 (07): : 565 - 568
  • [35] Dimensional analysis of droplet size and ligament length during high-speed rotary bell atomization
    Goedeke, Lutz
    Oswald, Walter
    Willenbacher, Norbert
    Ehrhard, Peter
    JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH, 2021, 18 (01) : 75 - 81
  • [36] Maturity Model and Evaluation Method of High-Speed Railway Operation Safety Management
    Li K.
    Zhang Y.
    Guo J.
    Song H.
    Zhongguo Tiedao Kexue/China Railway Science, 2019, 40 (05): : 138 - 144
  • [37] Analysis of the parts' roughness parameters of high-speed printing equipment by optical profilometry
    Roik, Tatyana T.
    Brovkyn, A.
    Dubolazov, A.
    FIFTEENTH INTERNATIONAL CONFERENCE ON CORRELATION OPTICS, 2021, 12126
  • [38] A Reliability Accelerated Test of High-speed Punch Based on Failure Analysis
    Chen, Lan
    Zhang, Xinzhou
    Gan, Shuyuan
    Wang, Yuan
    INTERNATIONAL SEMINAR ON APPLIED PHYSICS, OPTOELECTRONICS AND PHOTONICS (APOP 2016), 2016, 61
  • [39] Reliability Analysis of the High-speed Train Bearing Based on Wiener Process
    Zhu, Dexin
    Nan, Cui
    INFORMATION, 2018, 9 (01):
  • [40] Dynamic Reliability Evaluation of High-Speed Train Gearbox Based on Copula Function
    Liu, Yumei
    Chen, Yun
    IEEE ACCESS, 2022, 10 : 51792 - 51803
12345